Product: X12 EDI

Segment: MEA

Article Link: http://help.truecommerce.com/en/articles/10093414-x12-mea-measurements

MEA - Measurements

To specify physical measurements or counts, including dimensions, tolerances, variances, and weights

Schema

Element	Name	Min/Max
MEA01	Measurement Reference ID Code	2/2
MEA02	Measurement Qualifier	1/3
MEA03	Measurement Value	1/20
MEA04	Composite Unit of Measure
MEA05	Range Minimum	1/20
MEA06	Range Maximum	1/20
MEA07	Measurement Significance Code	2/2
MEA08	Measurement Attribute Code	2/2
MEA09	Surface/Layer/Position Code	2/2
MEA10	Measurement Method or Device	2/4
MEA11	Code List Qualifier Code	1/3
MEA12	Industry Code	1/30

MEA01 - Measurement Reference ID Code

TYPE=ID MIN=2 MAX=2

Code identifying the broad category to which a measurement applies

Code	Description
9L	Ninth Layer
AA	Meter reading-beginning actual/ending actual
AB	Average Balance
AC	Maximum Balance
AD	Serving Specifications
AE	Meter reading-beginning actual/ending estimated
AF	Actual Total
AG	Compliance Total
AH	Gross Compliance Total
AI	Net Compliance Total
AJ	Effectiveness
AK	Penetration
AL	Exposure
AM	Capacity
AN	Work
AO	Account Opened Period
AP	Apartments
AQ	Amount Owes
AR	Annual Result
AS	Modified Exposure
AT	Pro Rata Factor
AU	Sample
AV	Average Reading
AW	Relative Humidity
AX	Alcohol
BA	Base Point
BB	Bank Balance
BC	Billed Actual
BD	Billed Dimensions
BL	Bundle Limitation
BM	Base Metal
	Original or base product to which coatings are to be applied
BN	Billed Minimum
BO	Meter Reading as Billed
	Used when billing charges are based on contractual agreements or pre-established usage and not on actual usage
BP	Bearing Piece Limitation
BR	Billed History
BT	Batch Limits
	Limits set on test results from all product made for one unit or period of production
BZ	Batten Size
C1	Conformance Property Status
CA	Coating
	Material or product added to another product (base metal) to enhance its characteristics
CB	Condominium
CC	Cooperative
CF	Conversion Factor
CG	Average Owing
CH	Chemistry
CJ	Current Balance
CK	Discounted Checks
CL	Drafts
CM	Commercial
CN	Core Notch Dimensions
CO	Concentration
CP	Letter of Credit Size
CQ	Payment Orders
CS	Core Size
CT	Counts
CU	Pledge Size
CV	Cumulative Test Period
	The total period during which a series of tests are conducted
CW	Promissory Notes in Force
CY	Secured Amount
DE	Defects
DN	Dunnage Dimension
DT	Dimensional Tolerance
EA	Meter reading-beginning estimated/ending actual
EE	Meter reading-beginning estimated/ending estimated
EF	Evaluation Factors
EL	Electrical Characteristics
EN	Environmental Conditions
	The data values to be reported reflect the environmental conditions surrounding a situation including but not limited to test environments
FC	First of Campaign Result
FD	Finished Dimensions
	Dimensions of the final or end-use product
FH	Radio Operations
FJ	Antenna Characteristics
FV	Firing Values
FZ	File Size
GC	Contractor Delivery Limitations
GL	Guidelines
GO	Government Ordering Limitations
GP	Ordering Period Limitations
HC	High Credit Average
HR	Historical Result
ID	Industrial
IN	Incrustation
IR	Interpolated Result
	A test result value calculated by interpolation between two physical tests
LC	Limited Weight/Size Coils
LD	Load Planning Dimensions
LG	Loans Granted
LL	Lift Limitation
LM	Layer of Multiple Layered Product
LP	Last Sold Period
LS	Lot Status
LT	Lot Limits
	Limits set on test results from all product contained in a single shipment (which may involve any multiple or fraction of transportation carrier units) to one customer
MA	Accuracy
MB	Activity Period Result
MC	Average Daily Limit
MD	Design Capacity
ME	Map Scale
MF	Maximum Daily Limit
MI	Minerals
MP	Maturity Period
MR	Base Material Result
NC	Net Change
NE	Neighborhood
NS	North American Industrial Classification System (NAICS) Size Standard
NU	Nutritional
NX	Net Explosive Weight
OD	Ordered Dimensions
OG	Original
OL	Order Limits
OP	Other Property
P1	Platform Limitation
PA	Pallet Dimensions
PB	Receivership Period
PC	Parting Cut (Sawcut)
PD	Physical Dimensions
PI	Project Incomplete
PJ	Project Complete
PK	Package Dimensions
PL	Package Limitations
PM	Permitted
	The condition or activity approved by the appropriate regulatory agency
PO	Position
PR	Product Dimension Range Price Bracket
PS	Product Characteristic Specification
PT	Pretest Period
	The nominal period that a tested device is preconditioned
PU	Planned Urban Development
PY	Property
QR	Quarterly Result
QV	Quantity Variation
R1	Opening Reading
R2	Closing Reading
RA	Reject Amount
RG	Regulatory Limit
RL	Receiving Facility Limitations
RN	Lengths Limitation
RO	Roll Limits
	Limits set on test results from one roll of product shipped to a customer
RP	Relative Position
RQ	Requested
	The condition or activity submitted for approval by the appropriate regulatory agency
RS	Response Time
RT	Replacement
SA	Spacing/Margin
SB	Single Family
SC	Standard Industrial Classification (SIC) Code Size Standards
SD	Shipped Dimensions
SE	Property Specifications
	Indicates that the data to follow are target specifications
SF	Shelf Life
SH	Shipping Tolerance
SI	Selling Dimensions
SJ	Subject Phase
SK	Skid Dimensions
SL	Skid Limitations
SM	Shade
SP	Splices
SR	Surface Roughness
ST	Surface Treatment
SU	Surface
SZ	Subject Property
TA	Two to Four Family
TD	Splice Tape Dimensions
TE	Temperature
TI	Time
TL	Transportation Equipment Limitations
TO	Total Dimensions
TP	Test Period
	The nominal period that a test is conducted
TR	Test Results
	Indicates that the data to follow are the results test measurements
TS	Single Test Limits
	Limits set on each measurement of the specified product characteristic or manufacturing process so that any single test whose value falls outside these limits causes the product or process to be declared out-of-specification
TT	This Type Property
VI	Vitamin
VT	Vacant
WA	Waste Amount
WR	Warranty
WT	Weights
ZA	Multi - Family
ZP	Log Zero Point of Reference
	The physical location on the well, measured above or below the ground surface, from which the wireline well log measurements, such as the kelly bushing and casing head flange, are adjusted

MEA02 - Measurement Qualifier

TYPE=ID MIN=1 MAX=3

Code identifying a specific product or process characteristic to which a measurement applies

Code	Desription
1	Control Efficiency
2	Capture Efficiency
3	Photonflux Density
4	Throughput Rate
5	Cloud Cover
6	Velocity
7	Plume Height
8	Individuals
9	Storage Limits
A	Consolidated Weight
B	Billed Weight
C	Actual New Repeated for Combination
D	Destination Weight Agreement
E	Estimated New Weight
F	Deficit Weight
G	Gross Weight
H	Ground Water Reference Point
	Elevation of Ground Water Relative to the Mean Sea Level
I	Heat Input
L	Legal Weight
M	Minimum Weight (for Weight)
N	Actual Net Weight
O	Excess Weight Over Maximum
Q	Volatile Organic Compounds Plus Water
R	Per Unit Dunnage
S	State Weight
T	Tare Weight
U	Weight per Unit
V	Oxygenation Level
W	Reformulated Fuel Level
X	Maximum Weight (for Rate)
10	Painting Costs
11	Structural Costs
12	Appliances
13	Utilities
14	Carpet or Floors
15	Other Repairs
16	Landscaping
18	Roof
19	Windows
1F	Radio Frequency
20	Cleaning or Trash Removal
21	Probable Sales Price
22	Proximity
23	Repairs and Improvements
24	Contributory Value of Repairs and Improvements
25	Marketing Time
26	Closed Comparable Sales
27	Competitive Listings in Price Range
28	Financing Concessions
29	Marketing Concessions
2F	Alternate Radio Frequency
30	Probable Net Price
31	Suggested Initial List Price
32	Value Change
33	Probable Final Value
34	Occupancy Rate
35	Number of Living Units
36	Number of Phases
37	Number of Active Listings
38	Price Active Listings
3A	Target Depth
3B	Current Depth
3C	Total Depth
3D	Well Test Before Oil
3E	Well Test Before Gas
3F	Well Test Before Water
3G	Well Test After Oil
3H	Well Test After Gas
3I	Well Test After Water
3J	Estimated Depth of Operations
40	Price Per Gross Living Area
41	Built-up Rate
42	Vacant Rate
43	Typical Rents
44	Neighborhood Apartment Vacancy
45	Number of Admissions
48	Cost of Hire
49	Frontage
4F	Squelch Tone
50	Gross Sales
51	Number of Employees
52	Payroll
53	Per Capita or Each
54	Remuneration
56	Total Cost
57	Total Mileage
58	Number of Rating Units
5F	Height above Ground
62	Garage Employee Payroll Maximum
63	Employee Gross Wage Less Allowable Deductions
65	Garage Employee Average Hours Worked Per Week
66	Garage (Dealers) Employee Weeks Worked
68	Gross Wage
6F	Gain
78	Subcontractor - Labor and Materials
79	Subcontractor - Labor Only
8F	Directional Height above Average Terrain
A1	Acids
	A value, normally shown as a percent of the total, showing the content of all acidic structures contained in a solution of a known product
A2	Adsorption
	A value defining the adhesion in an extremely thin layer of molecules (as of gases, solutes, or liquids) to the surfaces of solid bodies or liquids with which they are in contact
A3	Aging Time
	The time taken, once a product has been initially manufactured, to come to a desired quality through undisturbed rest or curing; also, the time taken to bring to a desired use or maturity
A4	Aromatics
	A value, normally shown as a percent of the total, showing the content of all molecules in a product containing at least one benzene ring
A5	Average Differential Pressure
	Average difference between the upstream and downstream pressure through an orifice plate; expressed in inches of water
A6	Average Static Pressure
	Pressure of the flowing gas stream; expressed in pounds per square inch
A7	Flame Projection Distance
	The distance that a flame would project from an aerosol can containing the subject material if ignited
A9	Exposure
	A measure of the quantity of a specified form of energy or mass coming into contact with another specified object or space
AA	Alternating Current
AB	Activation Energy
AC	Actinium
AD	Ambient Temperature
AE	Argon
AF	Angle of Bend
AG	Americium
AH	Astatine
AI	Acidity
AJ	Aim Gage
	Physical dimension a producer is to "aim" toward producing or supplying
AK	Volatile Organic Compounds (VOCs)
	Organic compounds whose existence is calculable or detectable by methods specified by the U.S. Environmental Protection Agency
AL	Spine Show
AM	Average Speed
AN	Flute Test
AO	Alcohol
	Content of Alcohol in grams for the product based on the serving size provided
AP	Average Pressure
AR	Beta Carotene
	The vitamin Beta Carotene in the product based on the nutritional serving size provided
AS	Ash Fusion Temperature
AT	Additive
AU	Number of Units Projected
AV	Age
AW	Remaining Economic Life
AX	Remaining Physical Life
AY	Number of Comparable Sales
AZ	Arbor Size
B0	Blemishes
B1	Base Number
	A number that identifies the ability of a compound to react with an acid to either take up a proton from the acid or to give up unshared electrons to an acid to form a salt
B2	Number of Comparable Listings
B3	Present Land Use
B4	Subject Phase Dwelling Units
B5	Octanol/Water Partition Coefficient
	A scientific measure of the relative solubility of a material in octonol versus its solubility in water
B6	Total Project Dwelling Units
B7	Biotin
	The mineral Biotin in the product based on the nutritional serving size provided
B8	Carbohydrates
	Carbohydrates in the product based on the nutritional serving size provided
B9	Cholesterol
	Cholesterol in the product based on the nutritional serving size provided
BA	Barium
BB	Beryllium
BC	Billet Size
BD	Bias
BE	Boron Factor
BF	Brinell
BG	Berkelium
BH	Bromine
BI	Edible
	Indicates what % of the product is edible. The serving size is based on the edible portion of food and not on inedible components, e.g. bone, seed, shell, etc.
BJ	Burst Index
	The burst pressure of a paper or pulp sheet expressed per unit basis weight
BK	Bulk
BL	Blisters
BM	Energy
	Energy in kilojoules for the product based on the nutritional serving size provided
BN	Bend
	The ability of the product to undergo bending operation in forming
BO	Lateral Bow (Camber)
BP	Boiling Point
BQ	Breaks
BR	Brightness
BS	Folate
	Folate in the product based on the nutritional serving size provided
BT	Bursts
BU	Buckles
BV	Moisture Loss %
	The % of moisture loss after cooking the product
BW	Basis Weight
BX	Blood Alcohol
BY	Monounsaturated Fat
	Monounsaturated Fat in the product based on the nutritional serving size provided
BZ	Niacin-B3
	The vitamin Niacin B3 milligrams for the product based on the nutritional serving size provided
C0	Color Grade
C1	Carbonyl
	The measurement of the bivalent carbon-oxygen radical occurring in aldehydes, ketones, carboxylic acids, esters, acid halides, and amides; also, the measurement of the compound carbonyl radical with a metal
C2	Catalyst
	The measurement of any number of substances used in the production of a final product or retained in the final product that initiates a chemical reaction and enable the product to proceed under milder conditions than otherwise possible
C3	Maximum Contraction
	A result from a process that measures the total contraction of a sample
C4	Color Quadrant
C5	Omega 3 Fatty Acids
	The Omega 3 Fatty Acids in grams for the product based on the nutritional serving size provided
C6	Omega 6 Fatty Acids
	The Omega 6 Fatty Acids in grams for the product based on the nutritional serving size provided
C7	Organic Acids
	The content of Organic Acids in milligrams for the product based on the nutritional serving size provided
C8	Pantothenic Acid
	Pantothenic Acid in the product based on the nutritional serving size provided
C9	Polyunsaturated Fat
	Polyunsaturated Fat in the product based on the nutritional serving size provided
CA	Caliper
CB	Protein
	Protein in grams for the product based on the nutritional serving size provided
CC	Celsius
CD	Compression
CE	Capacitance In
CF	Capacitance Out
CG	Cadmium
CH	Cesium
CI	Curium
CJ	Cycle Time
CK	Californium
CL	Cladding Thickness(% of Composite Thickness)
CM	Cures
CN	Chlorine
CO	Core Loss
CP	Crimp
CQ	Cuts
CR	Crosswise Spacing
CS	Cross Section
CT	Center-to-center
CU	Coil Curvature
CV	Riboflavin-B2
	The vitamin Riboflavin in the product based on the nutritional serving size provided
CW	Cuttable Width
CX	Calculated Value
CY	Contamination
	The yellowness of cotton; correlates with the spotted and light spotted part of the classer grade; higher values represent more yellowness
CZ	Saturated Fat
	Saturated Fat in the product based on the nutritional serving size provided
D0	Diacetyl
D1	Maximum Dilatation
	A result from a process that measures the total expansion of a sample
D2	Dispersing Agent
	The measurement of the amount of substance that promotes the formation and stabilization of a dispersion of one substance in another
D3	Drying Agent
	The measurement of the amount of substance in a product that is used to extract liquid from either the manufacture or use of a product
D4	Dry Point
	A temperature measurement used in a distillation process to identify the temperature at which a product becomes dry
D5	Wear
	Measure of deterioration
D6	Horizontal
D7	Distillation Fraction
D8	Vertical
D9	Dots per Inch
DA	Delta Value A
DB	Delta Value B
DC	Ductile Class
DD	Depth of Dents
DE	Defects
DF	Distance Across Flats
DG	Direct Current
DH	Dysprosium
DI	Diameter
DJ	Dominant Wave Length
DK	Color Bits in Palette
DL	Delta Value L
DM	Dual Amplitude
DN	Density
DO	Compressed File Size
DP	Depth
DQ	Soluble Fibre
	Soluble Fibre in the product based on the nutritional serving size provided
DR	Delta R
	Planar variation of r value which is defined by the following equation: (r0 - 2r45 + r90)/2
DS	Distance Between Points
DT	Distance From Base Point
DU	Draw Tension
DV	Starch
	Total Starch in the product based on the nutritional serving size provided
DW	Width, Boxcar Door
DX	Sugar
	Total Sugar in the product based on the nutritional serving size provided
DY	Dyeability
DZ	Sugar Alcohol
	The Sugar Alcohol content in grams and % of DV/RDI (Daily Value / Recommended Daily Intake) for the product based on the serving size provided
E0	Extraneous Matter
E1	End
	Identifies a value measured at the end of a testing process or range of test results
E2	Thiamin-B1
	The vitamin Thiamin in the product based on the nutritional serving size provided
E3	Total Dietary Fibre
	Total dietary fibre in the product based on the nutritional serving size provided
E4	Total Fat
	Total Fat in the product based on the nutritional serving size provided
E5	Transfatty Acids
	Transfatty Acids in the product based on the nutritional serving size provided
E6	Vitamin B12
	Vitamin B12 in the product based on the nutritional serving size provided
E7	Vitamin B6
	The Vitamin B6 in the product based on the nutritional serving size provided
E8	Vitamin C
	Vitamin C in the product based on the nutritional serving size provided
E9	Vitamin D
	Vitamin D in the product based on the nutritional serving size provided
EA	Elongation
EB	Edge Burr
EC	English Coil Dimensions
ED	Eddy
EE	Einsteinium
EF	Europium
EG	Equivalent Temperature
EH	Erbium
EI	Expansion
EJ	Electrical Conductivity
EK	Vitamin E
	Vitamin E in the product based on the nutritional serving size provided
EL	Elasticity
	The springiness or rebound of a deformed material
EM	Elmendorf Tear
EN	Entanglement
EO	Vitamin K
	Vitamin K in the product based on the nutritional serving size provided
EP	Exciting Power
ES	Edge
ET	End Point
EW	Empty Weight
EX	Eccentricity
F0	Fat
F1	Fire Point
	The measurement of the temperature at which combustion initially begins for any number of substances
F2	Radiated Power
F3	Output Power (Peak Envelope)
F4	Height above Average Terrain
F5	Ground Elevation
F6	Height to Tip
F7	Radius from a Location
F8	Radius from Coordinates
F9	Operating Hours
FA	Fluorine
FB	Flare
FC	Short Cycle Flatness
FD	Frequency of Operation
FE	Fermium
FF	Francium
FG	Freezing Point
FH	Finish
FI	Filament Count
FJ	Face Width
	The width of the oscillate wound material
FK	Fluid Consistency
	Descriptor of a fluid expressed as the ratio, by weight, of total suspended solids to liquid
FL	Longitudinal Flatness
FN	Flatness
FP	Flashpoint
FQ	Frequency
FR	Flow Rate
FS	Fold Strength
FT	Flange Thickness
FU	Azimuth
FV	Transverse Flatness
FW	Flange Width
FX	Filler
FY	Beam
FZ	Output Power (Mean RF)
G1	Gutter
G2	Grain Size
	The internal grain morphology of a sample
G3	Tilt
G4	G-Force
GA	Grain
GB	Guided Bends Root
GC	Gadolinium
GD	Gold
GE	Guided Bends Face
GF	Guided Bends Side
GG	Gauge
GH	Gallium
GI	Grit, Brushed
	The percentage of a sample of TiO2 (water dispersed) which remains on a 325 mesh screen after washing and brushing the screen and surface to break apart soft agglomerates
GJ	Grit, Unbrushed
	The percentage of a sample of TiO2 (water dispersed) which remains on a 325 mesh screen after washing the screen surface
GK	Tinting Strength
	A measure of the hiding power of a titanium dioxide sample obtained by comparing the green (Y) reflectance of a tinted waterbased formula against that of a standard
GL	Gloss
GM	Emulsion Gloss
	The 60-degree gloss of a pigment sample in a waterbased paint formula
GN	Gross to Net Conversion Factor
GO	Particle End Point
	The reading on a Hegman gauge, below the fineness line, at which the population of scattered particles stops
GP	Group Package Separation
GQ	Scattered Particles
	The number of scattered particles (visible defects) in a drawdown on a Hegman gauge between the fineness line and the particle end point
GR	Gravity
GS	Carbon Black Undertone
	The blue/amber ratio (Z/X) of the reflectance of a paste made of titanium dioxide and carbon black; a measure of the TiO2 particle size
GT	Glass Transition Temperature
	Temperature at which an amorphous material changes from a brittle to a plastic state
GW	Gross Weight, Maximum
H1	Heavies
	A relative term that is used to identify the weight percent of all molecules beyond the peak identified as the molecule being tested for in a gas chromatograph result; also, all molecules that have a boiling point higher than the molecule being tested
H8	Net Explosive Weight
H9	Recommended Exposure Limit
	SEE CODE SOURCE 107
HA	Hydro Pressure
HB	Heavy Aluminas
HC	Helium
HD	High Propagation Delay Time
	The time between the specified reference points on the input and output waveforms, with the output changing from the defined low level to the defined high level
HE	Heavy Silicates
HF	Hardness
HG	Heavy Sulfides
HH	Heavy Globular Oxides
HI	Hafnium
HJ	Holmium
HK	Human Factors
HL	Heat Loss
	Quantity of original thermal energy removed
HM	Height, Maximum
HO	Holes
HP	Height of Tread Plate Pattern
HR	Height of Runners
HT	Height
HZ	Hazepoint
IA	Imperfections - Thicks
	Thick places in the yarn
IB	Impact Energy
IC	Incremental Distance
ID	Inside Diameter
IE	Imperfections - Thins
	Thin points in the yarn
IF	Input Low Voltage
IG	Granulated Ingot Size
IH	Input Current
II	Input Setup Time
IJ	Input Hold Time
IK	Indium
IL	Imperfections - Neps
	Short, broken or immature fibers in the yarn
IM	Iridium
IN	Input Low Current
	The current flowing out of input when a specified low-level voltage is applied to that input
IO	Input High Current
	The current flowing out of an input when a specified high level voltage is applied to that input
IP	Input Leakage Current
	The current flowing into an input when the maximum allowed voltage is applied to that input
IQ	Input Clamp Diode Voltage
	The most negative voltage at an input when the specified current is forced out of that input terminal
IR	Ideal Diameter
IS	Input High Voltage
IT	Interrupt Pulse Period
IU	Interrupt Setup Time
IV	Iodine
IW	Incrustation Factor
IX	Inside Diameter, Minimum
IY	Induction
	Magnetic force
IZ	Ingot Pound Size
JA	Junction Temperature
KA	Knoop
KB	Krypton
KN	K&N Holdout
L0	Leaf Grade
L1	Lights
	A relative term that is used to identify the weight percent of all molecules below the peak identified as the molecule being tested for in a gas chromatograph result; also, all molecules that have a boiling point lower than the molecule being tested
LA	Lanthanum
LB	Lithium
LC	Low Propagation Delay Time
	The time between the specified reference points on the input and output waveforms, with the output changing from high level to the defined low level
LD	Lawrencium
LE	Lutetium
LF	Long Fibers
LG	Leg
LL	Long Leg
LM	Length, Maximum
LN	Length
LO	Long Length
LP	Camber of Pattern Line
LS	Short Leg
LT	Lengthwise Spacing
LW	Long Width
M1	Melt Range
	A range of temperatures used to identify at what point compounds start to transform from a solid to a liquid state
M2	Maximum Differential Pressure
	The largest differential pressure reading at which this device will measure the differential pressure accurately
M3	Maximum Static Pressure
	Largest flowing gas pressure at which this device will measure volumes accurately
M4	Area
M5	Minimum Speed
M6	Maximum Speed
MA	Mean Average
MB	Mendelevium
MC	Min./Max Cuttable Width
MD	Measurement Voltage
	The reference voltage level on AC waveforms for determining AC performance
ME	Maximum Input Low Voltage
	The guaranteed input low threshold
MF	Minimum Input High Voltage
	The guaranteed input high voltage
MG	Mercury
MH	Melting Point
MI	Minimum
MJ	Major Section (Stepped)
MK	Microseperometer (MSEP)
MM	Management
MN	Minimum Average
MO	Mottles
MP	Mullen Pop
MQ	MCQuaid
	Austenitic grain morphology of a sample
MR	Module R (R Bar)
	Ratio of true width strain to true thickness strain; indicates the ability of the material to resist thinning and deform in draw
MS	Minor Section (Stepped)
MT	Moisture Content
MU	Multiplier
MV	Maximum Average
MW	Molecular Weight
MX	Maximum
MY	Magnetizing Field
NA	Number per Package
NB	Number per Bundle
NC	Number per Coil Group
ND	Neodymium
NF	Neon
NG	Nobelium
NH	Number of Items per Package Label
NI	Number of Splices per Package Label
NJ	Number of Sheets per Package Label
NK	Nesting Factor
NL	Number per Lift
NM	Number Pkgs. per Master Pack
NO	Nominal (Target, Aim)
NP	Percent of Specified
NS	Number per Skid
NU	Number per Unit
NV	N Value
	The work hardening rate capability of material and predicts the ability to deform in stretch, plane strain, and bending
O1	Orifice - Inside Diameter
OA	Offset
OB	Osmium
OC	Output Low Voltage
	The maximum guaranteed low voltage at an output terminal sinking the specified load-current output low current
OD	Outside Diameter
OE	Output Low Current
	The current flowing into an output which is in the low state
OF	Output High Voltage
	The minimum guaranteed high voltage at an output terminal for the specified output current 'output high current' and at the minimum VCC value
OG	Output High Current
	The leakage current flowing into a turned-off, open-collector output with a specified high output voltage applied
OH	Overhead Height, Receiving Door
OI	Output Off Current Low
	The current flowing out of a disabled three-state output with a specified low output voltage applied
OJ	Output Off Current High
	The current flowing into a disabled three-state output with a specified high output voltage applied
OK	Output Short-Circuit Current
	The current flowing out of an output which is in the high state when that output is short circuit to ground
OL	Output Disable Time from Low Level of a 3-State Output
	The delay time between the specified reference points on the input and output voltage waveforms with the three-state output changing from the low level to a high impedance 'off' state
OM	Outside Diameter, Maximum
ON	Output Disable Time from High Level of a 3-State Output
	The delay time between the specified reference points on the input and output voltage waveforms with three-state output changing from the high level to a high impedance 'off' state
OO	Output Enable Time from Low Level of a 3-State Output
	The delay time between the specified reference points on the input and output voltage waveforms with the three-state output changing from the high impedance 'off' state to the low level
OP	Openness
OQ	Output Enable Time from High Level of a 3-State Output
	The delay time between the specified reference points on the input and output voltage waveforms with the three-state output changing from high impedance 'off' state to the high level
OR	Distance Between Outside Runners
OS	Open Circuits
OT	Output Delay Time
OV	Opacity
OW	Overall Width
OX	Ownership Share
OY	Operating Weight
P1	Price
PA	Package Separation
PB	Pressure
PC	Per Hundred Linear Yards
PD	Platinum
PE	Potassium
PF	Promethium
PG	Polonium
PH	Pulse Setup Time
	The interval immediately preceding the active transition of the timing or preceding the transition of the control input to its latching level
PI	Pulse Hold Time
	The interval immediately following the active transition of the timing pulse or following the transition of control input to its latching level
PJ	Pulse Width
	The time between the specified reference points on the leading and trailing edges of a pulse
PK	Pulse Recovery Time
	The time between the reference point on the trailing edge of an asynchronous input control pulse and the reference point on the activating edge of a synchronous pulse input such that the device will respond to the synchronous input
PL	Percent Defective
PM	Practice
PN	Palladium
PO	Percent of Order (-, +)
	Expression of allowable variance of order expressed either as absolute (for example 92% to 110%) or relative percent (for example - 8% to + 10%)
PP	Powder/Paste Package Size
PQ	Plutonium
PR	Praseodymium
PS	Protactinium
PT	Pits
PU	Pressure Base
PV	Picks
PW	Purchased Width
PX	Purity
PY	Percent of Water
PZ	Pipe Size Nominal
QA	Quality Index
QB	Quantity or Loading Average
QC	Quantity or Loading Maximum
QD	Quality or Concentration Average
QE	Quality or Concentration Minimum
QF	Quality or Concentration Maximum
QG	Duration
QI	Abundance
QJ	Biomass
QK	Size Class
	Classification of a Continuum Into Discrete Units
QL	Quality
R1	Hemoglobin
R2	Hematocrit
R3	Epoetin Starting Dosage
R4	Creatinine
R7	Speed
R8	Speed Limit
R9	Retinol
RA	Relative Humidity
RB	Range Value
RC	Radius of Corner
RD	Readpoint
RE	Ream Weight
RF	Resistivity
RG	Radium
RH	Rhenium
RI	Rubidium
RJ	Rockwell-C
RK	Rockwell-B
RL	Reduction Ration
RM	RMS Range (Side 1)
RN	Required Interrupt Release
RO	Reset Pulse Width
RP	Reduction of Area
RQ	Radon
RR	Reduction Ratio
RS	RMS Range (Side 2)
RT	Rounds Ammunition/Military
RU	Rhodium
RV	Ruthenium
RW	Rolling Width
RX	Ridges
RY	Ratio
S1	Smoothness
S2	Selvedge on Beam
S3	Sheffield Smoothness
S4	Surface Strength
S5	Stiffness
S6	Saturation
S7	Sediment
S8	Solubility
S9	Site Atmospheric Pressure
	Ambient pressure of the metering location
SA	Sort Code CIE LAB
SB	Sort Code CMC
SC	Schedule Number (Pipe Size)
SD	Strength
SE	Selvage Left
SF	Samarium
SG	Slit Width
	Width into which a customer wants a material slit (cut) length wise
SH	Strontium
SI	Supply Current
	The current flowing into the VCC supply terminal of the circuit with specified input conditions and open outputs
SJ	Short Circuits
SK	Shrinkage
SL	Short Length
SM	Shear
SN	Stain
SO	Sort Code CIE LCH
SP	Splinter Count
SQ	Shipped Quantity
SR	Selvage Right
SS	Silver
ST	Stop Recovery Startup Time
SU	Shipped Units
SV	Scandium
SW	Short Width
SX	Sodium
SY	Service Interrupt Duration
SZ	Skid Height
T1	Tire Pressure
T2	Tube - Inside Diameter
T3	Technical
T4	Single End Break
	Break point of a single strand of yarn expressed in grams
T5	Skein Break
	Break strength of yarn in skein form
TA	Thickness Heavy End (Tapered/Stepped)
TB	Thickness Small End (Tapered/Stepped)
TC	Temperature
TD	Thin Aluminas
TE	Tenacity
TF	Tensile
TG	Thin Sulfides
TH	Thickness
TI	Thin Silicates
TJ	Total Supply Current
TK	Timer Pulse Width
TL	Tapered/Stepped Length Type
TM	Length Type: Multiples
TN	Timer Period
TO	Terbium
TP	Thorium
TQ	Thin Globular Oxides
TR	Length Type: Random
TS	Length Type: Specific
TT	Time
TU	Technetium
TV	Thallium
TW	Top
TX	Thulium
TY	Tear Strength
UA	Uranium
UG	Usage
VA	Vitamin A
	Vitamin A in the product based on the nutritional serving size provided
VH	Height, Van Door
VO	Voltage
VW	Width, Van Door
WA	Weight per Unit of Area
WB	Web
WC	Web Depth/Height
WD	Width
WE	Wolfram
WF	Wait Recovery Startup Time
WH	Whiteness
WI	Winding Loss
WL	Wall Thickness
WM	Width, Maximum
WR	Wrinkles
WT	Weight
WU	Weight per Unit of Length
WX	Wax Pick
XA	Xenon
XH	Side Height, Flat Bed With Removable Sides
XP	Specified
XQ	Squareness
XZ	Spool Size
YA	Yttrium
YB	Yield
YC	Ytterbium
YD	Yarn Count
	The length per unit mass of yarn
ZB	Boron
ZC	Carbon
ZD	Load Factor
	Relationship between watt hours and watt demand necessary to supply electric load
ZF	Sulfate Sulfur
	An oxidation product present in sulfur
ZG	Organic Sulfur
	The total sulfur less the percentage sums of sulfate sulfur and pyritic sulfur
ZH	Hydrogen
ZN	Nitrogen
ZO	Oxygen
ZP	Phosphorous
ZR	Pyritic Sulfur
	A heavy mineral (pyrite) found in sulfur
ZS	Sulfur
ZV	Vanadium
ZW	Tungsten
AAA	Acetic Acid
AAB	Aflatoxin (United States)
AAC	Anethole Content
AAO	Added Oil
AAP	AC-apparent Power
	Power measurement of a material subject to a magnetic induction
AAS	Acid Solubles
ABO	Absorbance
	The negative base 10 logarithm of the ratio of the radiant power transmitted by a sample to the radiant power incident upon the sample
ABR	Abrasion
	The qualitative ability of a surface to wear, grind, and rub away or to be worn away
ABS	Absorbency
	The rate at which a specimen takes up liquids or the amount of liquid required to saturate the specimen
ACN	Acid Number
	The quantity of base required to titrate acidic constituents present
ADH	Adhesion
	The molecular attraction between two or more bodies in contact
ADM	Dye Manufacturing Units
AGE	Inventory Age
	The age of inventory from the date or time of production to the present date or time
AGI	Aggressive Index
ALK	Alkalinity
	The quantitative capacity of aqueous media to react with hydrogen ions
ALN	Alkalinity Number
	The quantity of acid required to titrate basic constituents present
ALP	Alpha-Cellulose
	The average molecular chain length of pure long-chain cellulose in pulp
ALT	Alternate Measurement
AMI	Amines
	Content of basic compounds derived from ammonia by replacement of hydrogen by one or more univalent hydrocarbon radicals or other non-acidic organic radicals
AMW	Average Molecular Weight
	The average of the sums of the weights of molecules' constituent atoms in an object which contains more than one type of molecule
AMY	Amylograph
ANT	Antibiotics
AOE	Ethyl Alcohol
AOX	Antioxidant
	A substance that increases a product's oxidation resistance
API	API Gravity
	A special hydrometer scale recommended for exclusive use in the U.S. Petroleum Industry for liquids lighter than water
APP	Appearance
	The visible impression of an item
ASA	Acid Insoluble Ash
ASH	Ash
	The inorganic component of product
ASY	Assay
	The quantitative determination of the amount of the major or active component of an item
AVT	Average Temperature
BBC	Broken Cookies
BBF	Butterfat
BBX	Brix
BDP	Perforation Bottom Depth
	The deepest depth below surface level for perforations in the well casing
BGL	Beta Glucan
BHF	Bottomhole Pressure - Flowing
	Fluid pressure at the deepest depth in the well bore while production is flowing from the well; measured during well testing and completion operations
BHS	Bottomhole Pressure - Shutin
	Fluid pressure at the deepest depth in the well bore with the well annulus closed; measured during well testing and completion operations
BIC	Bark in Chips
	The ratio of tree bark to wood chips; indicates the level of one type of contamination in production of wood pulp
BND	Amount Bound in Material
	Amount that cannot be removed by volatilization, solvent extraction, or melting
BOR	Boiling Range
	The temperatures normally used or required to bring a substance to boil at different barometric pressures
BRS	Breaking Strength
	The greatest longitudinal stress a substance can bear without tearing apart
BSW	Percent Bottom Sediment and Water
BUD	Bulk Density
CAA	Citric Acid
CAU	Caustic Reaction Severity
	The severity of chemical reaction due to caustic present as the primary reactant
CCA	Cinnamic Aldehyde
CCF	Composite Corrected Factor
CCG	Combined Center of Gravity
CCL	Chocolate Liquor
CCT	Cook Test
CFI	Crude Fiber
CGP	CO2 Gas Production
CGR	Color Grayness RD
	Lightness or darkness of cotton
CHA	Chemical Addition Rate
	The quantity of chemical expressed by weight or volume added to manufacturing or testing process per unit of time
CHB	Chlorophyll-a
CHC	Concentration of Hazardous Component
CHG	Rate of Change
	The increase or decrease in polarity and amount of a change per unit of time
CHL	Chlorides
	Amount of chlorides in the water or brine produced from a well
CIV	Cuene Intrinsic Viscosity
	The average molecular weight of cellulose molecules in product
CLA	Clarity
	The clearness or transparency of an item
CLB	Calibration
CLN	Cleanliness
	The impurities remaining in and/or on the product
CLO	Chloramphenicol
COC	Canola Oil Coating
COF	Coefficient Factor
COH	Coercive Force
	Magnetizing force at which magnetic induction is zero
COL	Color
	The aspect of appearance dependent upon the wavelength of incident, reflected or transmitted, and observed light
CON	Concentration
	The relative amount of a component of a sample of product containing multiple components
COR	Corrosiveness
	The ability to destroy gradually by chemical reaction
COS	Cost
COT	Content
	The amount of specified material contained
CPF	Casing Pressure - Flowing
	Fluid pressure within the casing, or outermost tubing used to isolate the well from the surrounding geology, while production is flowing from the well; measured during well testing and completion operations
CPP	Count per Pound
CPS	Casing Pressure - Shutin
	Fluid pressure within the casing, or outermost tubing used to isolate the well from the surrounding geology, with the well annulus closed; measured during well testing and completion operations
CPT	Cup Test Adhesion
	Quantitative calculation of galvanneal coating loss during cup formation
CRF	Free Chlorine Residual
CRL	Compression Relaxation
CRN	Crown
	Increase in the thickness or height of a rolled product at the center compared to the thickness at the edge
CRT	Total Chlorine Residual
CSC	Choke Size - Casing
	The diameter of the orifice in the casing through which liquids flow
CSR	Cost Realism
CST	Choke Size - Tubing
	The diameter of the orifice in the tubing through which liquids flow
CTB	Classes that Blend
CTG	Coating
	Product applied to the top of a substrate or base
CTT	Contact Time
CUR	Curcumin
CUT	Cure Time
	The time required to prepare a product by chemical or physical processing for storage or use
CWT	Charge Weight
CYB	Color Yellowness (+B)
DAT	Datum Depth
	Depth below ground surface at which a measurement is taken within a well
DBL	Doubles
DCC	Defect Contrasting Classes
DCK	Dockage
DCT	Dirt Count
	The amount of visible contamination
DDW	Defect Damaged Wheat
DEM	De Minimis Level
	A measurable level of significance below which a requirement does not apply
DFS	Defect Skins
DHP	Defect Hulls
	Covers Hulls and Partial Hulls
DHW	Defect Heat Damaged Wheat
DIA	Diastase
DIK	Defect Insect Damaged Kernels
DIL	Dilution Factor; An amount by which a quantity is diluted in order to be read on an instrument scale
DIR	Distillation Range
	The temperature range in which a defined amount of material boils under specified conditions
DIS	Dispersion
	The ease with which one substance mixes with another
DLC	Dial Count
DME	Dichloromethane Extract
	The volatile components of pulp products
DMF	Distributed Meter Factor
DOC	Double Olsen Cup
	Visual observation rating zinc adherence after a cup forming operation
DOG	Defect Other Grains
DPM	Degree of Polymerization
	The average number of monomer units per polymer molecule in product
DRS	Dark Specs
DRW	Drained Weight
DRY	Dryness
	A product specification in pulp, paper, and chemicals
DSK	Defect Shrunken and Broken Kernels
DSP	Defect Splits
DTO	Defect Total
DWC	Defect Wheat of Other Classes
DWP	Dew Point
	The temperature at which a vapor begins to condense
DXE	Dextrose Equivalent
DXI	Invert Sugar
DYC	Dye Content
E90	Vitamin D3
EFC	Effective Carbohydrates
EKA	Vitamin E Acetate
ELC	Exposure Ceiling: Threshold Limit Value
ELE	Elevation
ELI	Immediately Dangerous to Life and Health
	A measurable level beyond which the most stringent safety measures, such as evacuation, must be taken
ELL	Explosion Limit
ELO	Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit
ELP	Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit Ceiling
ELS	American Conference of Government Industrial Hygienists (ACGIH) Threshold Limit Value: Short-Term Exposure
ELT	American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value: Time Weighted Average
ELV	Unshielded Exposure Rate
ELW	American Industrial Hygienists Association (AIHA) Work Environment Exposure Level (WEEL)
ELX	American Industrial Hygienists Association (AIHA) Work Environment Exposure Level (WEEL): Time Weighted Average
EMB	Bones
EMD	Ethoxylated Mono & Diglyceride
ENZ	Enzyme
EO1	Vitamin K1
EOR	Ethylene Oxide Residue
EPL	Expected Product Life
ESO	Essential Oil
EST	Esterification
ETH	Ethoxyquin
ETV	Ethyl Vanillin Content
EVL	Evaporation Loss
	The amount of material lost under specified conditions
EVR	Evaporation Rate
EXC	Extractable Color
EXH	Exhaust Benzene Emissions
	Benzene emissions from the exhaust system
EXT	Extractables
	Material removed by solvent extraction
FAA	Fat Acidity
FAI	Fat As Is
FAN	Falling Number
FAO	Free Fatty Acid As Oleic
FAR	Farinograph Arrival Time
FBP	Acetate Break Point
	The chemical reactivity of cellulose in the acetylation process
FBU	Fat due to Butterfat
FCB	Food Drug & Cosmetics (FD&C) Blue
FCM	Fat left in Cooked Meat
FCR	Food Drug & Cosmetics (FD&C) Red Number 4
FCY	Food Drug & Cosmetics (FD&C) Yellow Number 5
FDB	Fat on a Dry Basis
FEC	Fenchone Content
FFA	Free Fatty Acid
FIB	Fiber
FIL	Filter Number
	The filterability of a solution expressed in units combining the porosity of the filter medium and the time required for a standard volume of solution to pass through the filter at specific pressures
FIM	Film Integrity Test
FIN	Fineness
	Mean fiber width in micrograms per inch
FIT	Filterability
	The ability of a substance to pass through a given medium under specified conditions
FIV	Final Viscosity
FLD	Fluid Point
	The point at which the fused mass has spread out in a nearly flat layer with a maximum height of 1/16 in. (1.6 mm)
FLN	Fiber Length
	Instrument method of measuring length in hundredths of an inch
FLP	Fluid Level Above Pump
	The depth of well liquids above the location of a subsurface pump unit
FLT	Fluting
	Visual observation of a formed cylinder to determine if fluting is present
FLV	Flavor Threshold
FML	Flammability Limits
FMP	Fat Melting Point
FMZ	Flammability
FNL	Fines Retained on Screen
	Amount of particles in a material that is larger than a defined unit
FNS	Fines
	The amount of particles in a material that are smaller than a defined limit
FOA	Foam
	The dispersion of gas in a liquid or solid
FOB	Finishing Oil Honey Roasted
FOC	Finishing Oil Roasted
FOH	Front Over-Hang of Vehicle
FOI	Fouling Index
	The result of a procedure which represents the accumulation of deposits of ash on superheater, boiler and economizer tubes
FOM	Foreign Material
FOR	Foreign Matter
	The visible contamination in a material
FPV	Acetate Plugging Value
	The weight of a liquid that passes through a given area of filter at a constant filtration pressure before the filter becomes completely blocked or plugged; denotes the filtration quality of viscose or solutions of cellulose acetate
FRC	Fresh Cut
FRM	Final Raisin Moisture
FRU	Fructose
FSI	Free Swelling Index
	The result of a procedure regarding the caking properties of coal when burned as fuel
FUD	Full Load
FUP	Functionality Penetrometer
GEL	Gel
	Viscous jelly-like material
GES	Gel Strength
GGR	Gas Gravity
	The density of the produced gas relative to the density of air at standard temperature and pressure
GIR	Gas Injection Test Rate
	Volume of gas injected into the well bore during a 24-hour test period
GLC	Glycerol
GLE	Ground Level Elevation
GLY	Glycerin
GOA	Granulation on 3/8 Inch U.S. Standard Sieve (USSS)
GOB	Granulation on Number 10 U.S. Standard Sieve (USSS)
GOC	Granulation on Number 100 U.S. Standard Sieve (USSS)
GOD	Granulation on Number 14 U.S. Standard Sieve (USSS)
GOE	Granulation on Number 20 U.S. Standard Sieve (USSS)
GOF	Granulation on Number 25 U.S. Standard Sieve (USSS)
GOG	Granulation on Number 30 U.S. Standard Sieve (USSS)
GOH	Granulation on Number 40 U.S. Standard Sieve (USSS)
GOI	Granulation on Number 50 U.S. Standard Sieve (USSS)
GOJ	Granulation on Number 6 U.S. Standard Sieve (USSS)
GOK	Granulation on Number 60 U.S. Standard Sieve (USSS)
GOL	Granulation on Number 80 U.S. Standard Sieve (USSS)
GOM	Granulation on 1/2 Inch U.S. Standard Sieve (USSS)
GON	Granulation on 1/4 Inch U.S. Standard Sieve (USSS)
GOR	Gas-to-Oil Ratio
	A measure of the gas produced from a hydrocarbon well relative to the oil produced
GRA	Gas Test Rate
	Volume of gas produced from a well during a 24-hour test period
GRI	Graininess
	The crystallinity of a substance
GRN	Granulation
GTA	Granulation thru Number 100 U.S. Standard Sieve (USSS)
GTB	Granulation thru Number 140 U.S. Standard Sieve (USSS)
GTC	Granulation thru Number 18 U.S. Standard Sieve (USSS)
GTD	Granulation thru Number 20 U.S. Standard Sieve (USSS)
GTE	Granulation thru Number 200 U.S. Standard Sieve (USSS)
GTF	Granulation thru Number 50 U.S. Standard Sieve (USSS)
GTG	Granulation thru Number 60 U.S. Standard Sieve (USSS)
GTH	Granulation thru Number 7 U.S. Standard Sieve (USSS)
GTI	Granulation thru 3/8 Inch U.S. Standard Sieve (USSS)
GTJ	Granulation thru Number 6 U.S. Standard Sieve (USSS)
H2O	Water Volume
HAR	Hardening Rate
HAZ	Haze
HCG	Horizontal Center of Gravity
HCH	Distance to Endpoint
HCI	Emission Factor
HCJ	Heat Content
HCK	Pollutant Emission
HCL	Population
HCM	Release Duration
HCN	Released Quantity
HCO	Release Rate
HCP	Sulfur Content
HCQ	Wind Speed
HCR	Acute Toxicity
HCS	Chronic Toxicity
HCT	Discharges
HCU	Effectiveness
HCV	Fertilization
HCW	Samples in Compliance
HCX	Toxicity
HEX	Hexanal
HHW	Hemispherical Point
	The point at which the cone has fused down to a hemispherical lump at which point the height is one half the width of the base as shown by the fourth cone
HIB	High Boilers
	The components of a mixture which boil at a higher temperature than the rest of the mixture
HOC	Heat of Combustion
HTE	Heat Equivalency
HVM	Heavy Metals
	The metals of atomic weight greater than sodium that form soaps of reaction with fatty acids
HWS	Softening Point
	The point at which the cone has fused down to a spherical lump in which the height is equal to the width at the base
HYD	Hydroxyl Number
	The alkalinity of oil, fat, wax or other substances
HYP	Hydroxyporpylcellulose
HZC	Hazardous Component
IDE	Identification
	The distinguishing characteristics of a material for verification purposes
IGA	Autoignition Temperature
IGR	Input Gas Rate
	Volume of gas input during a 24-hour test period
IHV	Inherent Viscosity
IMA	Impact Adhesion
	Visual observation rating zinc adherence after using a dropped ball
IMP	Impurities
	The amount of components other than the major or active components in an item
IND	Initial Deformation Point
	The point at which the first rounding of the apex of the cone occurs
INS	Insolubles
	The residue remaining after dissolving an item in a solvent
INV	Invertase
IPI	Primary Irritation Index
IRA	Inclusion Rating
	The internal nonmetallic particles in the product
ISP	Incubated Spindown
ITD	Integrated Differential
IXD	Index Differential
JOM	Jominy Hardenability
	The product's hardness and depth of hardening
KVL	Strength Coefficient
LAI	Langlier Index
LAS	Lot Acceptability for Shape
LC5	Lethal Concentration, 50% ("LC-50")
	The lowest value of concentration which will result in the death of exactly one half of a given biological test population
LCG	Longitudinal Center of Gravity
LD5	Lethal Dose, 50% ("LD-50")
	The lowest value of dose which will result in the death of exactly one half of a given biological test population
LDH	Limited Dome Height (LDH)
	Response to simulated drawing operation
LEA	Leakers
LEF	Leaf
	Percentage of leaf in fiber as determined by trash count and trash area
LIP	Lipids
LIR	Liquid Injection Test Rate
	Volume of liquids, such as oil, mud, and water, which are injected into the well during a 24-hour test period
LIS	Listeria
LIV	Limit Intrinsic Viscosity
	The percent of cellulose in a crystalline rather than amorphous form
LLD	Light Load
LOI	Loss on Ignition
	Loss (of material) that occurs when a sample is ignited
LOS	Loss on Drying
	The amount of material lost after heating to a constant weight at a specified temperature
LOW	Low Boilers
	The components of a mixture which boil at a lower temperature than the rest of the mixture
LPG	Liquefied Petroleum Gas Factor
LPL	Labeled Product Life
LPR	Line Pressure
	Fluid pressure of the production line between the well and the separator unit or gathering line
LRC	Lovibond Red Color
LSA	Lock Seam Adhesion
	Visual observation rating zinc adherence after a lockforming operation
LSK	Length Shrinkage
	The amount of shrinkage occurring per linear yard of fabric expressed in percentage
LSS	Linear Sheet Swelling
	The increased size of a sheet of pulp when immersed in caustic during pulping
LTD	Liner Top Depth
	Depth below the surface of the top of a liner string; liner is a tube within the casing used to separate different strata but does not extend to the surface
MAT	Maturity
	Swelling and compression of fiber
MCN	Magnetic Contamination
MDL	Method Detection Limit; Minimum concentration of a substance that can be measured and reported with 99% confidence that analyte concentration is greater than zero
MDP	Mettler Dropping Point
MEA	Media Depth
	Depth to surface of medium (water, sediment, soil) being sampled
MEF	Meter Factor
MEL	Melt Time
	The time between the first appearance of liquid and the total disappearance of solid
MEP	Meat Protein
MER	Efficient Rate-Reservoir
	The maximum daily oil or gas withdrawal rate from a hydrocarbon reservoir
MGL	Monoglyceride
MHI	Highest Torque
	Highest torque attained during specified period of time when no plateau or maximum torque is obtained
MIC	Micronaire
	Fiber fineness; the higher the value, the courser the fiber
MII	Mineral Impurities
MIL	Milk Fat
MIP	Miscolored Pieces
MIS	Milk Solids
MNL	Monolein
MOI	Moisture
	The amount of water in an item
MOR	Mortality
MPL	Monopalmitin
MPO	Moisture Protein Ratio
MPR	Production Rate-Well
	The maximum daily rate of at which oil or gas may be produced from a hydrocarbon well
MPT	Many Press Test
	Visual inspection for coating defects using a miniature stamping press
MSA	Monounsaturated
MST	Monostearin
MTD	Maximum Total Depth
	Total distance along the well bore to the final bottom hole location
MTI	Farinograph Mixing Tolerance Index
MUL	Mullen
	The energy required to burst a sheet with one of several standard pluggers
NEE	Non-volatile Ether Extract
NES	Neutralizing Strength
NEU	Neutralization Number
	The quantity of acid or base required to neutralize basic or acidic constituents in a substance
NIL	Nil Ductility Test
	The condition required to initiate brittle fracture
NIT	Nitrite
NNW	Net Net Weight
	The weight of an item exclusive of the weight of any shipping packaging and of any additional packaging or attachments such as cellophane wrapping or hangers
NOB	Norbixin
NOC	Number of Cosigners
NON	Non-Volatile Matter
	The amount of residue remaining after an analytical process
NOR	Number of References
NOX	NOx Emissions Performance
	Difference in exhaust NOx emissions attributed to a gasoline formulation as compared to the 1990 baseline gasoline
NTS	Natural Tomato Soluables
NVO	Non-volatile Oil
OAP	Observed American Petroleum Institute Gravity
OBT	Observed Temperature
OCG	Oil/Condensate Gravity
	Production fluid density relative to the density of water
OCO	Oil Coating
OCR	Oil/Condensate Test Rate
	Volume of oil and natural gas condensate produced during a 24-hour test period
ODR	Odor
	The quality of a substance that stimulates the olfactory organ
OIL	Oil
	Liquid, slippery, viscous, relatively nonvolatile chemical
OLA	Oleic Acid
OLE	Olefins
	Hydrocarbons containing double bonds
ORC	Organic Carbon
	The amount of carbon which is bonded to another carbon or hydrogen or both
OTE	Others Each
	Identifies the maximum value of any single metallic element not listed in the chemical composition limits standard
OTH	Odor Threshold
OTT	Others Total
	Identifies the total value of all metallic elements not listed in the chemical composition limits standard
OXI	Oxidizable Substance
	Represents the amount of a substance that can undergo oxidation
OXS	Oxidizing Substance
	A substance which removes electrons from other substances
OXY	Oxyethylene
PAR	Particle Size
	The diameter of solid and liquid particles
PAT	Patulin
PBD	Plug Back Total Depth
	Well depth after plug back operations to abandon a lower producing horizon or formation
PCO	Piece Count
PDE	Casing/Liner Tubing Depth
	Depth to the bottom of the casing/liner string
PDG	Pump Depth from Ground
	The distance from the ground surface to the subsurface pump unit
PDI	Protein Dispersibility Index
PDX	Polydextrose
PEC	Potassium Chloride
PEF	Performance
PEO	Peroxidase
PER	Magnetic Permeability
	The ease with which a material can be magnetized and how much better it is as a path for magnetic fields than air
PES	Potassium Sorbate
PEV	Peak Viscosity
PEX	Perioxide Value
PFO	Perforation Feet Open
	Linear distance of all perforations of the well casing string
PGL	Polyethylene Glycol
PGM	Propylene Glycol Monoesters
PHA	pH
PHE	Phenol
PHW	Hardwood Fiber
	The amount of threadlike, primarily cellulosic material derived from the wood portion of hardwood trees
PIC	Pick Off
PIP	Piperine
POC	Completion
POD	Physical Description - Outer Diameter
POL	Polariation
POP	Pour Point
	The lowest temperature at which an oil is observed to flow when cooled
POR	Propylene Oxide Residue
PPS	Proprietary Shade
	Identifies to customers when a textile company is using the customer's proprietary shade code versus the standard industry shade code
PQL	Practical Quantitation Limit; Lowest concentration of a substance which can be consistently determined within +/- 20% of the true concentration by 75% of the laboratories tested in a performance evaluation study
PRA	Proportion Alive
PRE	Prior Experience
PRF	Pressure Factor
PRG	Propylene Glycol
PRI	Product Index
PRL	Product Level
PRN	Proportion Normal
PRO	Processability
	A rating of the ability to process
PRQ	Product Reportable Quantity
PRY	Porosity
PRZ	Proportion Fertilized
PSA	Percent Solution Actual
PSP	Past Performance
PSR	Pesticide Residuals
PSW	Softwood Fiber
	The amount of threadlike, primarily cellulosic material derived from the wood of softwood trees
PUN	Pungency
PWA	Processed Waste
PWE	Physical Description - Weight
PWF	Power Factor
QUR	Reportable Quantity
QUS	Quick Sog
R10	Relative Fraction of Pure Long-Chain Cellulose
	The ratio by weight of pure long-chain and degraded cellulose to pulp where cellulose molecules of various chain lengths occur
R18	Relative Fraction of Total Cellulose
	The ratio by weight of total cellulose to pulp
RAD	Radius
RAF	Roof Adjustment Factor
RAL	Residual Alcohol
RDS	Reducing Sugars
REA	Reactivity
	The rate at which a substance reacts or the amount of substance that reacts
RED	Reducing Substance
	A substance which donates electrons to other substances
REF	Refining
	The severity of mechanical processing stage expressed by the amount of energy applied and length of time product is retained within equipment
REH	Rehydration
REI	Refractive Index
	The ratio of the velocity of light in a vacuum to the velocity of light in the liquid
REL	Reflectance
	The fraction of the total radiant flux incident upon a surface that is reflected and that varies according to the wavelength distribution of the incident variation
REO	Residual Ethylene Oxide
RES	Resistance
	The property of a conductor causing electric energy to be transformed into heat; equal to the voltage across the conductor divided by the electrical current flowing in the conductor; measured in ohms
ROH	Rear Over-Hang of Vehicle
ROI	Residue on Ignition
ROX	Oxygen from a Renewable Oxygenate
RSZ	Roll Size
RTB	Reporting Temperature Base
RUD	Usage Deviation (Applies to Kilowatt Hours, Kilowatt Demand and Reactive Demand)
RVP	Reid Vapor Pressure
S10	Pulp Impurities
	The percent hemicellulose polysaccharides and degraded cellulose in pulp fibers
S11	Salt
S12	Start
	Identifies a value measured at the start of a testing process or range of test results
S18	Hemicellulose
	The percent hemicellulose polysaccharides in pulp fibers
SAB	Sodium Acid Pyrophosphate (SAPP) by Boyd Method
SAC	Sodium Ascorbate
SAH	Sodium Acid Pyrophosphate (SAPP) by Humidified Boyd Method
SAK	Sodium Acid Pyrophosphate (SAPP) by Chittick Method
SAL	Salinity; Salt level in a sample of seawater
SAP	Saponification Number
	The number of milligrams of potassium hydroxide that is consumed by 1 gram of sample
SAS	Saturated Fatty Acid as Stearic
SBE	Sodium Benzoate
SBI	Sodium Bicarbonate
SBR	Sodium Bicarbonate Release
SBU	Sodium Bisulfite
SCH	Schedule
SDC	Color Strength
SDV	Surface Starch
SEV	Severity
SFA	Solid Fat Index at 104 F
SFB	Solid Fat Index at 50 F
SFC	Short Fiber Content
SFD	Solid Fat Index at 80 F
SFE	Sodium Ferrocyanate
SFG	Solid Fat Index at 92 F
SFJ	Solid Fat Index at 70 F
SFO	Solid Fat Content
SHA	Shelf Life
SHE	Shell
SHU	Scoville Heat Units
SIL	Silica (Silicon Dioxide)
SIZ	Size
SLD	Solderability
	A measure of the ability of a material or component to be soldered
SLI	Slagging Index
	The result of a procedure for obtaining information regarding the accumulation of ash deposits on radiant heat exchange surfaces in the furnace
SLL	Salmonella
SMB	SAM-B Rating
	Measures cleanliness of steel for critical parts as to B-oxide volume in the steel
SMD	SAM-D Rating
	Measures cleanliness of steel for critical parts as to D-oxide volume in the steel
SOA	Soda
SOC	Sodium Acid Pyrophosphate
SOD	Solids
	The non-volatile material remaining after an analytical process
SOF	Softening Range
	The temperature range in which material without a melting point goes from a rigid to a soft condition
SPA	Saturated Fatty Acid as Palmitic
SPG	Specific Gravity
SPH	Sphere
SPR	Separator Pressure
	Operating pressure of the oil/water/gas separating unit
SPS	Static Pressure
SRO	Specific Rotation
SSA	Sodium Silico Aluminate
STA	Stability
	The property of a chemical compound which is not readily decomposed and does not react with other compounds
STL	Short Term Exposure Limit
STP	Staple
	Conventional method of measuring fiber length as pulled by hand
SUC	Sucrose
SUL	Sulfite
SUM	Suspended Matter
	The mixture of fine, non-settling particles of a solid within a liquid or gas
SUP	Suspended Pulp
SUR	Surface Roughness
SUS	Suspended Solids
SUT	Surface Tension
	The force acting on the surface of a liquid which tends to minimize the area of the surface
SVL	Survival
SXS	Sodium Sulfate
SXX	S10 Minus S18 Value
	The percent degraded cellulose in pulp fibers
T50	T50
	Temperature at which 50% of the volume of a mixture being distilled has been evaporated
T90	T90
	Temperature at which 90% of the volume of a mixture being distilled has been evaporated
TAC	Tartaric Acid
TAS	Taste
	The chemical sense by which flavors are perceived depending on taste, tactile, and warm and cold receptors in the mouth, as well as smell receptors in the nose
TCL	Tire Tread Contact Length
TCR	Temperature Control Range
TDD	Total Sugar (Dry)
TDP	Perforation Top Depth
	The depth from the ground surface to the top, or shallowest, portion of the well casing perforations
TEE	Autodecomposition Temperature
TES	Storage Temperature
TEW	Test Weight
TEX	Texture
	The property of a solid substance which is dependent on the size, form, order, and grouping of the smaller parts of which it is made and the way in which these parts are united
TIA	Titratable Acidity
TOA	Aquatic Toxicity
TOR	Torque
	A force that produces rotation or torsion
TOT	Total Aldehyde Content
TOX	Toxic Emissions Performance
	Difference in exhaust toxic emissions attributed to a gasoline formulation as compared to the 1990 baseline gasoline
TPE	Farinograph Time to Peak
TPF	Temperature Factor
TPL	Tubing Pressure - Flowing
	Fluid pressure within the inner tubing used to isolate different production streams from the surrounding well while production is flowing from the well; measured during well testing and completion operations
TPQ	Threshold Planning Quantity
TPS	Tubing Pressure - Shutin
	Fluid pressure within the casing, the outermost tubing used to isolate the well from the surrounding geology, with the well annulus closed; measured during well testing and completion operations
TRA	Trash Area
	The number of pixels dotted by trash
TRC	Trash Count
	Amount of trash in the court fiber
TRD	Tire Diameter
TRN	Transmittance
	The fraction of the emitted light of a given wavelength which is not reflected or absorbed but passes through a substance
TRP	Tricalcium Phosphate
TRS	Transmissivity; Measure of the quantity of light that passes through a given volume of seawater; also used to measure turbidity and to estimate plant growing zones in the ocean
TRT	Transmissivity Pathlength; The length of the path taken to arrive at transmissivity measurements
TSO	Total Solids
TSZ	Trim Size
TTL	Trailer Tongue Length
TUR	Turbidity
	The extent of cloudiness in an item in which colloidally dispersed particles are present
TVD	Maximum True Vertical Depth
	Total vertical distance from a surface location directly above the bottom hole location
TVO	Total Volatiles
TWD	Tire Width
UCB	Cube
	The external cubic dimensions of a specified product
UNA	Unipunch Adhesion
	Visual observation rating zinc adherence after a die punch
UNI	Uniformity
	The degree of uniformity of fibers in a sample
UNK	Unknowns
	Substances that are quantitated but of unknown identity
UPW	Units per Weight
VAD	Vapor Density
VAL	Vanillin
VAN	Vanilla
VAP	Vapor Pressure
VBA	V-Bend Adhesion
	Visual observation rating zinc adherence after peeling tape from a bent coupon
VCG	Vertical Center of Gravity
VIA	Vitamin A Palimate
VIN	Vinyl
	A chemical having the vinyl group CH2=CH-
VIS	Viscosity
VOA	Volatile Oil Ash
VOC	VOC Emissions Performance
	Difference in exhaust VOC (Volatile Organic Compounds) emissions attributed to a gasoline formulation as compared to the 1990 baseline gasoline
VOI	Volatile Oil
VOL	Volume
VOM	Vomitoxin
VOT	Volatiles
	The gas or vapor material given off by an item under defined conditions
VOV	Volatiles by Volume
VOW	Volatiles by Weight
VSO	Volume Split to Others
VWT	Volume Weight
WAB	Water Absorption
WAC	Water Activity
WDE	Water Depth
	The depth of the water at an offshore location; measured from sea or lake bottom to the mean tidal level
WEL	Weight Loss
	The amount of substance by weight that a material loses when subjected to specified conditions
WHT	Whip Test
WIN	Water Insolubles
WML	Weight of Moisture Loss
WMP	Wiley Melting Point
WOD	Water-Oil Distribution Coefficient
	A measure of the miscibility of oil and water
WPF	Wellhead Pressure-Flowing
	The pressure as measured at the wellhead of a hydrocarbon well during a flow test
WPL	Water/Product Level
WPN	Whey Protein Nitrogen
WPP	Weight Per Piece
WPS	Wellhead Pressure Shutin
	The pressure as measured at the wellhead of a hydrocarbon well during a shutin condition
WRA	Water Test Rate
	The volume of water produced during a 24-hour test period
WSK	Width Shrinkage
	The amount of shrinkage occurring per yard in the width of fabric expressed in percentage
WSO	Water Solubles
WTB	Water/Tank Bottom Level
YPE	Yield Point Elongation
	The amount of extension which occurs between the upper yield point and the point at which the load begins to rise steadily again
ZAL	Aluminum
ZAS	Arsenic
ZBI	Bismuth
ZBT	N-Butane
	Relative concentration of N-Butane in the gas stream being measured
ZBZ	Benzene
ZCA	Calcium
ZCB	Columbium
ZCC	Calcium Chloride
ZCD	Carbon Dioxide
	Relative concentration of carbon dioxide in the gas stream being measured
ZCE	Cerium
ZCM	Carbon Monoxide
ZCO	Cobalt
ZCR	Chromium
ZCS	Calcium Sulfate
ZCU	Copper
ZDA	Titanium Dioxide Assay
ZET	Ethane
	Relative concentration of ethane in the gas stream being measured
ZFE	Iron
ZFL	Newspaper--Full Page
ZFS	Iron plus Silicon
ZGE	Germanium
ZHP	Heptane
	Relative concentration of heptane in the gas stream being measured
ZHS	Hydrogen Sulfide
	Relative concentration of hydrogen sulfide in the gas stream being measured
ZHX	Hexane
	Relative concentration of hexane in the gas stream being measured
ZIB	I-Butane
	Relative concentration of I-Butane in the gas stream being measured
ZIP	I-Pentane
	Relative concentration of I-Pentane in the gas stream being measured
ZMG	Magnesium
ZMN	Manganese
ZMO	Molybdenum
ZMT	Methane
	Relative concentration of methane in the gas stream being measured
ZNB	Niobium
ZNI	Nickel
ZNP	Neo-Pentane
	Relative concentration of neo-pentane in the gas stream being measured
ZOC	Octane
	Relative concentration of octane in the gas stream being measured
ZPB	Lead
ZPP	Propane
	Relative concentration of propane in the gas stream being measured
ZPT	N-Pentane
	Relative concentration of N-Pentane in the gas stream being measured
ZSB	Antimony
ZSD	Sulfur Dioxide
ZSE	Selenium
ZSI	Silicon
ZSN	Tin
ZTA	Tantalum
ZTB	Newspaper--Tabloid Page
ZTE	Tellurium
ZTI	Titanium
ZZN	Zinc
ZZR	Zirconium
ZZZ	Mutually Defined

MEA03 - Measurement Value

TYPE=R MIN=1 MAX=20

The value of the measurement

MEA04 - Composite Unit of Measure

C001 - Composite Unit of Measure

To identify a composite unit of measure

MEA05 - Range Minimum

TYPE=R MIN=1 MAX=20

The value specifying the minimum of the measurement range

MEA06 - Range Maximum

TYPE=R MIN=1 MAX=20

The value specifying the maximum of the measurement range

MEA07 - Measurement Significance Code

TYPE=ID MIN=2 MAX=2

Code used to benchmark, qualify or further define a measurement value

Code	Description
01	Where Air = 1
02	Where Butyl Acetate = 1
03	Approximately
04	Equal to
05	Greater than or equal to
06	Greater than
07	Less than
08	Less than or equal to
09	Where H2O = 1 or Water = 1
10	Not equal to
11	Corrected to 60 Degrees Fahrenheit
12	Where Toluene = 1
13	Vapor in Air
14	Vapor in Other Than Air
15	Standard Temperature and Pressure
16	Conditions Other Than Standard Temperature and Pressure
17	In Ethyl Alcohol
18	In Ethyl Ether
19	In Water
20	At 1 Atmosphere Pressure
21	Where Ether = 1
22	Actual
23	Predicted
24	Air-dried Basis
	A condition representative of a partially dried sample
25	As-received Basis
	A condition representative of a sample as it arrived at a laboratory, before any processing or conditioning
26	Dry Basis
	A condition representative of no moisture in the sample
27	Equilibrium Basis
	A condition representative of material in its natural state
28	Moisture and Ash-Free Basis
	A condition representative of no moisture and no ash in the sample
29	Oxidizing Atmosphere
	The presence of oxidizing gases during testing
30	Reducing Atmosphere
	The presence of reducing gases during testing
31	Calculated
32	Scaled Weight
	A weight that is taken from a scale rather than calculated
34	Ratchet
	Highest previously attained value
35	Saturated Vapor
	Measurement applies to the maximum amount of product material that can be held in vapor form without condensing
36	Unconditional
	Measurement applies with no further conditions beyond those already specified
37	Short-term
	Measurement applies only over the short-term specified
38	Time-weighted
	Measurement signifies that the measurement for each event is weighted by the time duration of that event
39	Corrected
40	Uncorrected
41	Off Peak
42	On Peak
43	Intermediate
44	Average
	Calculated Value was based on an average parameter or standard
45	Per Gallon
	Calculated Value was based on per gallon parameter or standard
46	Estimated
47	Minimum
49	Mist
50	Predominant
51	Total
52	Cost
53	Tenant
54	Owner
55	For Sale
56	Real Estate Owned or Corporate Owned
57	Boarded or Blocked Up
58	Planned
59	Completed
60	Sold
61	Rented
62	Current
63	Current List
64	Effective
65	List When Sold
66	Sales
67	Final List
68	As Is
69	As Repaired or Improved
70	Instantaneous
71	Low
72	Low to Good
73	Low to High
74	Low to Medium
75	Low to Moderate
76	Medium
77	Medium to Good
78	Medium to High
79	Moderate
80	Moderate to Good
81	Moderate to High
82	Moderate to Medium
83	Good
84	Good to High
85	High
86	Budgeted
87	Forecast
88	Adjusted
89	Allocated
90	Increasing
91	Stable
92	Declining
93	Previous
94	Potential
95	Modeled
96	Measured
97	Maximum
98	Regulated
99	Spring
AA	Summer On-peak
AB	Summer Mid-peak
AC	Summer Off-peak
AD	Summer Super On-peak
AE	Summer Super Off-peak
AF	Winter On-peak
AG	Winter Mid-peak
AH	Winter Off-peak
AI	Winter Super On-peak
AJ	Winter Super Off-peak
AK	Summer Day
AL	Summer Night
AM	Winter Day
AN	Winter Night
AO	Summer
AP	Winter
AQ	Day
AR	Night
AS	Peak-2
AT	Peak-3
AU	Peak-4
AV	Shoulder
AW	Non Time Related Demand
AX	Fall
AY	Summer On Peak-2
	Identifier for a tarriffed rate for metered service consumption and billing
AZ	Winter On Peak-2
	Identifier for a tarriffed rate for metered service consumption and billing
BA	Probable Contamination
BB	Not Confirmed
	Value of the Result is Tentative Due to a Possible Identification Problem
BC	Tentative Identification
BD	Failed
BE	Summer Mid Peak-2
	Identifier for a tarriffed rate for metered service consumption and billing
BF	Winter Mid Peak-2
	Identifier for a tarriffed rate for metered service consumption and billing
ZZ	Mutually Defined

MEA08 - Measurement Attribute Code

TYPE=ID MIN=2 MAX=2

Code used to express an attribute response when a numeric measurement value cannot be determined

Code	Description
01	Clear
02	Hazy
03	Excess
04	Some
05	Undetectable
06	Trace
07	Yes
08	Closed
09	Pass
10	Present
11	Gel
12	OK
13	Slight
14	No Good
15	Marginal
16	Nil
17	Oil Free
18	Open
19	Free
20	No
21	Checked
22	Fail
23	Absent
24	Good
25	Fair
26	Poor
27	Excellent
28	Bright
29	To Be Determined
30	High
31	Negative
32	Partial
33	Variable
40	Balance
41	Complete
42	Low
44	Not Applicable
45	Not Determined
46	Negligible
48	Moderate
49	Appreciable
50	Not Available
51	Conforming
52	Non-conforming
53	Probable Contamination
54	Tentative Identification
56	Detected; Not Quantified
BA	Backer
	Paint manufacturer's recommended film thickness for a particular paint system for a non-exposed application
FL	Full
	Paint manufacturer's recommended film thickness for a particular paint system for an exposed application
NA	Not Analyzed
ND	Not Detected
NS	Not Sampled
PR	Present and Not Counted
Q1	First Quality
Q2	Second Quality
TA	Too Numerous to Count
TB	New
WS	Washcoat
	Paint manufacturer's recommended film thickness for a particular paint system for a non-exposed application, where broad film-thickness tolerances not requiring close control are permissible
ZZ	Mutually Defined

MEA09 - Surface/Layer/Position Code

TYPE=ID MIN=2 MAX=2

Code indicating the product surface, layer or position that is being described

Code	Description
1S	Side One
2S	Side Two
A1	Single
A2	Left Front
A3	Right Front
A4	Left Rear
A5	Right Rear
A6	Inside Left Rear
A7	Outside Left Rear
A8	Inside Right Rear
A9	Outside Right Rear
AL	All
AO	Single End Overhang
AS	Siding
B1	Bolster
BC	Back of Cab
BI	Bilateral
BK	Rear
BL	Block
BR	Brick
BS	Both Sides
BT	Bottom
CH	Casing Head Flange
	A flange affixed at the top of the casing string used to attach the production equipment; this surface can be used as a log-zero reference point
CT	Center
DO	Double End Overhang
DT	Downstream Tap
	The tap source or location for the static pressure being measured is from the downstream port of the flange or pipe tap; "Downstream Tap" terminology is used to indicate the source of the static pressure being measured and/or the application in the volume calculation
DU	Dual Fuel Tank Position
EX	Exterior
FR	Front
FS	Front Spare
GF	Rig Floor
	The platform of a drilling rig or derrick on which drilling operations are carried out; this surface can be used as a log-zero reference point
IN	Inside
IT	Interior
KB	Kelly Bushing
	A device fitted to the rotary table through which the kelly passes and by means of which the torque of the rotary table is transmitted to the kelly and to the drillstem; this surface can be used as a log-zero reference point
LC	Less Critical Surface
LO	Lower
LT	Left
M1	Multiple
MC	More Critical Surface
MD	Middle
NS	Not Specified
NT	Next Relative Position
OA	Overall
OS	One Side
OT	Outside
R0	Relative Position 10
R1	Relative Position 1
R2	Relative Position 2
R3	Relative Position 3
R4	Relative Position 4
R5	Relative Position 5
R6	Relative Position 6
R7	Relative Position 7
R8	Relative Position 8
R9	Relative Position 9
RA	Relative Position 11
RB	Relative Position 12
RC	Relative Position 13
RD	Relative Position 14
RE	Relative Position 15
RF	Relative Position 16
RG	Relative Position 17
RH	Relative Position 18
RI	Relative Position 19
RJ	Relative Position 20
RK	Relative Position 21
RL	Relative Position 22
RM	Relative Position 23
RN	Relative Position 24
RO	Relative Position 25
RP	Relative Position 26
RQ	Relative Position 27
RR	Relative Position 28
RS	Relative Position 29
RT	Relative Position 30
RU	Relative Position 31
RV	Relative Position 32
RW	Relative Position 33
RX	Relative Position 34
RY	Relative Position 35
RZ	Relative Position 36
S1	Relative Position 37
S2	Relative Position 38
S3	Relative Position 39
S4	Relative Position 40
S5	Relative Position 41
S6	Relative Position 42
S7	Relative Position 43
S8	Relative Position 44
S9	Relative Position 45
SA	Relative Position 46
SB	Right
SC	Relative Position 47
SD	Relative Position 48
SE	Relative Position 49
SF	Relative Position 50
SN	Stone
SP	Spare Tire Position
SS	Rear Spare
ST	Stucco
SU	Sub-sea
	Depth measured below sea level; this surface can be used as a log-zero reference point
TB	Tank Bottom
TP	Top
TS	Two Sides
UC	Under Cab
UN	Unilateral
UP	Upper
UT	Upstream Tap
	The tap source or location for the static pressure being measured is from the upstream port of the flange or pipe tap; "Upstream Tap" terminology is used to indicate the source of the static pressure being measured and/or the application in the volume calculation
WF	Wood

MEA10 - Measurement Method or Device

TYPE=ID MIN=2 MAX=4

The method or device used to record the measurement

Code	Description
BM	Bellows Meter
	A type recording instrument which employs flexible vessels that expand when pressure is applied; the movement or expansion of the vessels is an indicator of the pressure applied; bellows meters are commonly used in low pressure or differential pressure measurement; "Bellows Meter" terminology is used to indicate that corrections in volume calculations are applied with respect to Bellows recorder characteristics
BO	Based on 120 Days List to Contract
DM	Displacement Meter
	A metering instrument in which mechanical displacement of known volume chambers are repeatedly filled and emptied; the volume of the chambers times the cycles of displacement is equal to the measure of volume; "Displacement Meter" terminology may also be used to define the application of volume calculation
FT	Flange Tap
	A critical parameter of design for orifice measurement where the pressure ports for the sensing of static and differential pressure are located one inch upstream and one inch downstream of the orifice plate; "Flange Tap" terminology is used to define the tap configuration employed
HN	Hubometer
	An axle mounted device to measure distance traveled by a motor vehicle
MA	Measured Over Six Months
MM	Mercury Meter
	A type of recording instrument which employs mercury displacement in a fixed chamber when pressure is applied, the displacement is an indicator of the pressure applied; the mercury recorder is primarily used in low pressure differential pressure measurement; "Mercury Meter" terminology is used to indicate that corrections is volume calculations are applied with respect to mercury recorder characteristics
OM	Orifice Meter
	A metering instrument used to measure flowing fluid through a pipe by velocity displacement and employing orifice technologies; the orifice meter is an inferential device which senses the pressure differential created by the passage of a fluid through an orifice of critical diameter placed in the pipe; a rate of flow is calculated from the fluid flowing and instrument parameters to determine the measure of volume; "Orifice Meter" terminology may also be used to define the application of volume calculation
OU	Odometer
PT	Pipe Tap
	A critical parameter of design for orifice measurement where the pressure ports for the sensing of static and differential pressure are located in a distance of two and one-half times the published inside diameter of the meter upstream of the orifice place and a distance of eight times the published inside diameter of the meter downstream of the orifice plate; "Pipe Tap" terminology is used to define the tap configuration employed
TM	Turbine Meter
	A type of metering instrument used to measure flowing fluid through a pipe by velocity displacement and employing turbine senses the rotation of a rotor axis turbine which is parallel to the axis of flow and proportional to the rate; the measure of volume is determined by counting the revolutions of the rotor; "Turbine Meter" terminology may also be used to define the application of volume calculation
VA	Valued at 90 Day Marketing Time Method
VB	Valued at 120 Day Marketing Time Method
VC	Valued at 180 Day Marketing Time Method

MEA11 - Code List Qualifier Code

TYPE=ID MIN=1 MAX=3

Code identifying a specific industry code list

Code	Description
0	Document Identification Code
1	Free On Board Site Code
3	Kind of Contract Code
4	Type of Contract Code
5	Criticality Designator Code
7	Quality Assurance Site Code
8	Acceptance Site Code
A	American Society for Testing and Materials (ASTM)
B	Bank Administration Institute (BAI)
C	Canadian Inter*EDI
D	Court Document Type Code
E	Diagnostic Statistical Manual of Mental Disorders Code List (DSM)
F	Financial Rating
G	Risk Class
H	Life/Annuity Status Codes
I	Identifying Characteristics
J	Trade Code
K	Property Underwriting Condition Code
L	Line Item Condition Code
M	Policy Type Code
N	Valuation Type Code
O	Source of Loss Code
P	Ceiling Type Code
Q	Surface Descriptor Code
R	Coverage Modifier
S	Society for Worldwide Interbank Financial Telecommunications (SWIFT)
T	Personal Property and Contents Code
U	Residential and Commercial Room Code
V	Violation Type Code List
W	Court Issued Warrant Type Code
X	Vehicle Class
Y	Rental Charge
Z	Cancellation Reason
10	Transaction Status Indicator Code
11	Contract Delivery Date Revision Agent Code
12	Reason for Contract Delivery Date Revision Code
13	Recommendations Regarding Delayed Deliveries Code
14	Contract Shipment Advice Code
15	Individual Insurance Financial Detail
16	Cash Discount Stipulation Code
17	Shipment Acceptance Discrepancy Explanation Code
18	Insurance Plan Description Characteristics
19	Contract Close-out Group Code
20	Payment Type Code
21	Contract Fund Reporting Transaction Code
22	Contract Payment Deduction or Collection Code
23	Obligation Variance Code
24	Plus or Minus Indicator Code
25	Reason for Delayed Closing of Contract File Code
26	Contract Payment Line Item Status Code
27	Special Reimbursable Provisions Code
28	Kind of Modification Code
29	Purchasing Contract Officer (PCO) Instructions Code
30	Type of Delay Code
31	Healthcare Provider Characteristics and Resources
32	Container and Roll-on/Roll-off Number Code
33	Air Commodity and Special Handling Code
34	Water Commodity and Special Handling Code
35	Air Dimension Code
36	Air Terminal Identifier Code
37	Water Terminal Identifier Code
38	Consolidation and Containerization Point Code
39	Transportation Mode or Method Code
40	Type Pack Code
41	Date Shipped or Received Code
42	Estimated Time of Arrival Code
43	Military and Civilian Grade Code
44	Seavan Ownership Code
45	Ocean Carrier Code
46	Voyage Document Number Code
47	Voyage Manifest Reference Code
48	Vessel Status and Terms of Carriage Code
49	Vessel Sustaining Code
50	Subrogation Action Code
52	Billing Advice Code
53	Billing Status Code
54	Type of Bill Code
55	Recipient of Billing Status Code
56	Sales Price Condition Code
57	Delivery Source Code
58	Transportation Bill Code
59	Stock Fund or Non-stock Fund Code
60	General Services Administration (GSA) Customer Supply Center Number Code
61	Information Indicator Code
62	Communications Routing Identifier Code
63	Content Indicator Code
65	Health Care Claim Status Code
66	Suffix or Limit Code
67	Type of Assistance Code
68	Healthcare Provider Taxonomy
69	Foreign Military Sales Country Code
71	Service and Agency Code
72	Disbursement Status Code
73	Aid Type Code
74	Demand Code
75	Suffix Code
78	Project Code
79	Priority Designator Code
80	Advice Code
81	Status Code
82	Shipment Hold Code
83	Supply Condition Code
84	Management Code
85	Country and Activity Code
87	Subsistence Type of Pack Code
88	Disposal Authority Code
89	Cooperative Logistics Program Support Code
90	Precious Metals Indicator Code
91	Automated Data Processing Equipment Identification Code
92	Reason for Disposal Code
93	Type of Storage Code
94	Identification Code
95	Offer and Release Option Code
96	Shipment Release Code
97	Ultimate Recipient Code
98	Reason for Requisitioning Code
99	Purpose Code
A1	Ownership Code
A2	Customer Within Country Code
A3	Delivery Term Code
A4	Case Designator Number
A5	Subcase Number
A6	Freight Forwarder Number
A7	Record Control Number
A8	Program Year Code
A9	Supplemental Data
AA	Country Code (Finance and Acquisition)
AB	Defense Priorities and Allocations System Code
AC	Account Characteristics Code
AD	Acquisition Advice Code
AE	Beneficiary Type
AF	Class of Pitch
AG	Grade of Difficulty
AH	Acquisition Method Suffix Code
AI	Acquisition Method Code
AJ	Utilization Code
AK	Distribution Code
AL	Special Requirements Code
AM	Locale of Activity
AN	Nature of Event Code
AO	Settlement/Payout Options
AQ	Application Question Identifier
AR	Arrest Reason
AS	Form Type Code
AT	Allegation Type Code
AU	All Patient Refined Diagnosis Related Groups (APR-DRG)
AV	Subrogation Payment Options
AW	All Patient Diagnosis Related Groups (AP-DRG)
AX	Ambulatory Patient Groups (APG)
AY	Subrogation Response Codes
AZ	Subrogation Request Codes
BA	Vessel Stowage Location Code
BB	Business Type
BC	Transportation Holding Delay Code
BD	Transportation Priority Code
BE	Value
BF	International Classification of Diseases Clinical Modification (ICD-9-CM) Diagnosis
BG	Condition
BH	Occurrence
BI	Occurrence Span
BJ	International Classification of Diseases Clinical Modification (ICD-9-CM) Admitting Diagnosis
BK	International Classification of Diseases Clinical Modification (ICD-9-CM) Principal Diagnosis
BL	Application Fee Status Codes
BN	International Classification of Diseases Clinical Modification (ICD-9-CM) External Cause of Injury Code (E-codes)
BO	Healthcare Common Procedure Coding System
BP	Healthcare Common Procedure Coding System Principal Procedure
BQ	International Classification of Diseases Clinical Modification (ICD-9-CM) Other Procedure Codes
BR	International Classification of Diseases Clinical Modification (ICD-9-CM) Principal Procedure Codes
BS	Current Procedural Terminology (CPT) Codes
BT	Accident Description
BU	Part of Body Affected
BV	Education Institution Type Code
BW	Educational Areas Code
BX	Profession Type Code
BY	Share Type Code
BZ	Business Size Code
C1	Eye Color Code
C2	Hair Color Code
C3	Skin Tone Code
CA	Type of Inquiry Code
CB	Billed Office Indicator Code
CC	Treasury Symbol Code
CD	Supplementary Accounting Classification Code
CE	Reference and Station Code
CF	Major Force Program Code
CG	Aircraft Mission Design Series Code
CH	Type of Issue Code
CI	Criminal Charge
CJ	Criminal Charge Grade
CK	Coupon Adjustment Reason Code
CL	County Designator Code
CM	Financial Management Service Cash-Link Code
CN	Cause of Injury Code
CO	Customized Notice Type Code
CP	Salvage Disposition Code
CQ	Capacity Type Indicator
CR	Federal Item Identification Guide Criticality (FIIG) Code
CS	Clause Status Type
CT	Compensation Type Codes
CU	Cuisine Type Code
CV	Coverage Code List
CW	Controvert Code
CZ	Conviction Offense Type
D1	Driver's License Withdrawal Type
D2	Driver's License Withdrawal Extent
D3	Driver's License Withdrawal Basis
D4	Driver's License Withdrawal Due Process Status
D5	Driver's License Withdrawal Reason
DA	Device Availability Code
DB	Debtor Business Type Code
DC	Report Distribution Code
DD	International Classification of Diseases Clinical Modification (ICD-9-CM) Primary Diagnosis
DE	Signal Code
DF	Media and Status Code
DG	Fund Code
DH	Drug Detail Code
DI	Single Use Label Code
DJ	Remedial Action Code
DK	Program Originator Code
DL	Service Contract Act Operation Code
DM	Agent Status Code
DN	Nature of Debt Code
DO	Device Operator Type Code
DP	Producer Financial History Codes
DQ	Device Status Code
DR	Diagnosis Related Group (DRG)
DS	Related Device Applicability Code
DT	Debtor Type Code
DU	Device Usage Code
DW	Estimating Method Status Code
DX	Contact Status Code
DY	Type of Firm Code
DZ	Reportable Event Status Code
EA	Asset Status or Transaction Reporting Code
EB	Asset Transfer Status Code
EC	Certification Requirements Code
ED	Coast Designation Code
EE	Competitive Characteristics Code
EF	Correction or Change for Storage Item Records Code
EG	Excavation Information Code List
EH	Type Due-In Indicator
EI	Discrepancy Indicator Code
EJ	Disposal Condition Code
EK	Event or Exposure Code
EL	Error Classification Code
EM	Inventory Category Code
EN	Local Source Code
EO	Adverse Event Outcome Code
EQ	Controlled Inventory Item Code
ER	Department of Defense Identification Code
ES	Extension Reason
ET	Reject Advice Code
EU	Request Code
EV	Review Period Indicator Code
EW	Small Arms Error Transaction Reject Code
EX	Small Arms Transaction Code
EY	Special Program Requirement Status Code
EZ	Type Inspection Code
FA	Type of Contractor Code
FB	Type of Media Code
FC	Type Physical Inventory or Transaction History Code
FD	Demilitarization Code
FE	Shelf Life Code
FF	Essentiality Code
FG	Source Maintenance and Recoverability Code
FH	Type of Location Reconciliation Request
FI	Applicant Type
FJ	Antenna Structure Type
FK	Station Classification
FL	Radio Frequency Type
FM	Station Classification Type
FN	Class of Operation
FO	Antenna Polarization
FP	Fund Purpose
FQ	Radio System Type
FR	Frequency Band
FS	Area of Operation
FT	Application Type
FU	Authorization Type
FV	Radio Service Type
FW	Applicant Classification Type
FX	Frequency
FZ	Edit Error Code
G1	Uniform Residential Appraisal Attributes Code
GA	Action Code
GB	Medium of Transmission Code
GC	Management Indicator Code (Petroleum)
GD	Gain or Loss Indicator Code
GE	Type Adjustment Code
GF	Type Identity Change Code
GG	Transportation Mode Reason Code
GI	Notification Indicator Code
GJ	Reject Indicator Code
GK	Investigation Status Code
GQ	Group Qualifier Code
GR	National Council on Compensation Insurance (NCCI) Nature of Injury Code
GS	Occupational Safety and Health Administration (OSHA) Nature of Injury Code
GT	National Council on Compensation Insurance (NCCI) Part of Body Code
GU	Occupational Safety and Health Administration (OSHA) Part of Body Code
GV	National Council on Compensation Insurance (NCCI) Source of Injury Code
GW	Occupational Safety and Health Administration (OSHA) Source of Injury Code
GX	Glass Action Code
GY	Cause of Loss Code
GZ	Loss Description Code
HA	Discrepancy Code
HB	Discrepancy Advice Code
HC	Institutional Sector or Level Classification Code
HD	Discrepancy Status or Disposition Code
HE	Claim Payment Remark Codes
HF	Education Staff Type Code
HG	Education Fee Type Code
HI	Health Industry Number
HJ	Institutional Fee Basis Code
HK	National Center for Education Statistics Integrated Postsecondary Education Data System Institutional Characteristics Survey Code
HL	Accreditation, Affiliation, or Licensing Level Code
HM	National Center for Education Statistics Accreditation or Licensing Type
HO	Home Infusion EDI Coalition (HIEC) Product/Service Code
HS	Service Contract Act Occupation Category Code
IC	Collision Industry Electronic Commerce Association (CIECA) - Inspection
ID	Identity Disclosure Code
IF	Investment Fund Type
IQ	IRS Qualification Code
IT	Initial Treatment Code
J0	Summons Type Code
J1	Judicial Hearing Type Code
J2	Judicial Order Type Code
J3	Judicial Sentence Type Code
J4	Court Disposition Code
J5	Court Appearance Type Code
J6	Court Pleading Type Code
J7	Defendant Plea Type Code
J8	Trial Type Code
J9	Court Case Status Code
JA	Physical Characteristics Code
JB	Weight or Fragility Code
JC	Preservation Material Code
JD	Quantity per Unit Pack Code
JE	Preservation Data Code
JF	Packing Requirement Level A Code
JG	Packing Requirement Level B Code
JH	Packing Requirement Level C Code
JI	Intermediate Container Code
JK	Intermediate Container Quantity Code
JL	Special Marking Code
JM	Type and Cause Code
JN	Mission Impact Statement Code
JO	International Standard Designation System for Teeth and Areas of the Oral Cavity
JP	Universal National Tooth Designation System
KA	Deficiency Cause
KB	Discrepancy
KC	Preventive Measure
KD	Contractor Alert List Reason
KE	Quality Alert List Reason
KF	Contractor Alert List Status
KG	Nature of Buy
KH	Type of Procurement
KI	Representative Buy Indicator
KJ	Assured Delivery Indicator
KK	Award Source
KL	Termination
KM	Patient Event Problem Code
KO	Method Evaluation Code
KP	Result Evaluation Code
KQ	Conclusion Evaluation Code
KS	Device Event Problem Code
KT	Dose Form Code
KU	Route Code
KW	Report Source Code
KZ	Adverse Event Code
LA	Contract
LB	Contractor Review List Status
LC	Laboratory Test Condition Code
LD	Collision Industry Electronic Commerce Association (CIECA) - Loss Category
LE	Life/Annuity Service Features
LF	Life/Annuity Product Code
LG	Location Code
LH	Basis of Jurisdiction Code
LJ	Principal Party Citizenship Code
LK	Nature of Suit Code
LM	Case Origin Code
LN	Line of business code
LO	Letter of Recommendation Rating Category
LP	Deficiency Indicator
LQ	Delinquency Indicator
LR	Test Results Code
LS	Loss Severity Code
LT	Laboratory Results Identification Code
LZ	War Reserve Material Requirement Code
MA	Multi-Media Object
MB	Service Contract Act Occupation Classification Code
MC	Manual Class Code
ME	Device Evaluation Code
MI	Minority Indicator
MJ	Drug Status Code
MK	Drug Status Adverse Event Code
ML	Lot Type Code
MN	Post Market Study Status Code
MS	Meter Status
MT	Meter Type
NA	Plant Clearance Office Code
NB	Inventory Type Code
NC	Property Record Status Code
ND	Control Unit Design Code
NE	Direct Numerical Control System Code
NF	Type Numerical Control System Code
NH	Property Source Code
NI	Nature of Injury Code
NJ	Uniform Freight Classification (UFC) Code
NK	National Motor Freight Classification (NMFC) Code
NP	Special Category Code
NR	Excess Material Disposition Code
NS	Hazardous Material Code
NT	Type of Cargo Code
O1	Office of Worker's Compensation Programs (OWCP) Source of Injury Code
O2	Office of Worker's Compensation Programs (OWCP) Nature of Injury Code
O3	Office of Worker's Compensation Programs (OWCP) Part of Body Code
O4	Office of Worker's Compensation Programs (OWCP) Occupation Code
OC	Occupation Code
PA	Prior Damage Location Code
PB	Part of Body Code
PC	Collision Industry Electronic Commerce Association (CIECA) - Profile
PD	Professional Designation
PI	Collision Industry Electronic Commerce Association (CIECA) - Points of Impact
PL	Priority Lookup
PR	International Classification of Diseases Clinical Modification (ICD-9-CM) Patient's Reason for Visit
PS	Professional Status Code
PT	Price Tier
QA	Response Status Code
QB	Business Entity Filing Report Type Code
QC	Business Entity Filing Detail Code
QE	Domestic Line of Business Code
QF	Foreign Line of Business Code
QG	Business Entity Filing Status Code
QH	Business Entity Filing Securities Information Code
QI	Business Entity Financial Information Code
QJ	Business Entity Status Code
QK	Business Entity Filing Location Code
QS	Query Status
QT	Quantity Type Indicator
R1	Upstream Rank (Priority)
R2	Receipt Rank (Priority)
R3	Delivery Rank (Priority)
R4	Downstream Rank (Priority)
R5	Threaded Rank
RA	Religious Affiliation Code
RC	Requirement Code
RD	Property Ownership Type Code
RE	Property Type Code
RI	Residency Indicator
RQ	Testing Service Question Code List
RT	Request Type
RX	National Council for Prescription Drug Programs Reject/Payment Codes
SA	Student Activity Type Code
SB	Student Award Code
SC	Source
SD	International Classification of Diseases Clinical Modification (ICD-9-CM) Secondary Diagnosis
SE	Sound Code
SF	Run Type
SG	Source of Deposit Code
SH	Source of Lead Code
SI	SIC (Standard Industrial Classification)
SJ	Source of Injury Code
SL	Secondary Source of Injury
SO	Solicitation Cancellation Reason
SP	Standard Occupation Classification Code
SR	Statistical Administrative Information Code
SS	System Status
ST	Special Marketing Type Code
TB	Association for Financial Professionals Service Code and Bank Service Code
TC	Treatment Codes
TD	International Classification of Diseases Clinical Modification (ICD-9-CM) Tertiary Diagnosis
TE	Association for Financial Professionals Service Code
TF	Title Exception and Requirement Code List
TG	Title Document Code List
TL	Tap Location
TP	Tap Type
TQ	Systemized Nomenclature of Dentistry (SNODENT)
TR	Report Code
TT	Natural Gas Transaction Type
TX	Follow-up Code
TY	Reportable Event Code
UR	Event Reappearance Code
US	Event Abatement Code
UT	Centers for Medicare and Medicaid Services (CMS) Durable Medical Equipment Regional Carrier (DMERC) Certificate of Medical Necessity (CMN) Forms
UU	Unit Code
VP	Collision Industry Electronic Commerce Association (CIECA) - Vehicle Line Item Category Code
XD	Export Declaration
ZZ	Mutually Defined
100	Freddie Mac (Federal Home Loan Mortgage Corporation) Special Character Code
101	Fannie Mae (Federal National Mortgage Association) Special Feature Code
102	Mortgage Index Source Code
103	Fannie Mae (Federal National Mortgage Association) Remittance Programs
104	Freddie Mac (Federal Home Loan Mortgage Corporation) Remittance Programs
105	Freddie Mac (Federal Home Loan Mortgage Corporation) Mortgage Insurance Code
106	Fannie Mae (Federal National Mortgage Association) Pool Feature Code
107	Fannie Mae (Federal National Mortgage Association) Mortgage Insurance Code
108	Testing Statistical Category Code List
109	Testing Demographic Category Code List
AAA	SNOMED, Systematized Nomenclature of Medicine
AAD	Asset Type
AAE	Current Asset Type
AAF	Current Liability Type
AAG	Dun and Bradstreet Canada's 8 digit Standard Industrial Classification Code
AAH	Financial Item Allocation Code
AAI	Financial Item Attributed Code
AAJ	Financial Item Reclassification Code
AAK	Functional Area
AAL	Hobby Code
AAM	Investment Type
AAN	Liability Type
AAO	Projection Type
AAP	Trend Reason
AAQ	NACHA (National Automated Clearing House Association)
AAR	CPA (Canadian Payments Association)
AAS	Proprietary
AAT	Fannie Mae Adjustable Rate Mortgage Plan Codes
AAU	International Classification of Diseases Clinical Modification (ICD-9-CM) Diagnosis Encountered During Examination and Investigation of Individuals and Populations Code
AAV	International Classification of Diseases Clinical Modification (ICD-9-CM) Vaccination, Innoculation or Isolation Code
AAW	Immunization Injection Code
AAX	International Classification of Diseases Clinical Modification (ICD-9-CM) Code
AAY	Current Dental Terminology (CDT) Code
ABF	International Classification of Diseases Clinical Modification (ICD-10-CM) Diagnosis
ABJ	International Classification of Diseases Clinical Modification (ICD-10-CM) Admitting Diagnosis
ABK	International Classification of Diseases Clinical Modification (ICD-10-CM) Principal Diagnosis
ABN	International Classification of Diseases Clinical Modification (ICD-10-CM) External Cause of Injury Code
ABR	Assigned by Receiver
ABS	Assigned by Sender
ABU	International Classification of Diseases Clinical Modification (ICD-10-CM) Diagnosis Encountered During Examination and Investigation of Individuals and Populations Code
ABV	International Classification of Diseases Clinical Modification (ICD-10-CM) Vaccination, Innoculation or Isolation Code
ACR	Academic Rank
ADD	International Classification of Diseases Clinical Modification (ICD-10-CM) Primary Diagnosis
ADJ	Accounting Adjustment Method
AJT	Adjustment Type
ALM	Allocation Method
ALP	Alteration Lookup
APE	Activite Principale Exercee (APE) Code
APR	International Classification of Diseases Clinical Modification (ICD-10-CM) Patient's Reason for Visit
ARI	Allocation Rank Indicator
ASD	International Classification of Diseases Clinical Modification (ICD-10-CM) Secondary Diagnosis
ATD	International Classification of Diseases Clinical Modification (ICD-10-CM) Tertiary Diagnosis
ATT	Allocation Transaction Type Code
BBQ	International Classification of Diseases Clinical Modification (ICD-10-PCS) Other Procedure Codes
BBR	International Classification of Diseases Clinical Modification (ICD-10-PCS) Principal Procedure Codes
BCC	Business Change Code
BCR	Business Credit Rating
BPL	Board of Inspection and Survey Part Lookup
BRL	Board of Inspection and Survey Responsibility Lookup
BSL	Board of Inspection and Survey Ship Lookup
BSP	Business Period
BTC	Balance Type Code
BUI	Bid Up Indicator
CAH	Advanced Billing Concepts (ABC) Codes
CCC	Correction To Cause Code
CFI	Contractual Flow Indicator
CHG	Charge Indicator
CIE	Collision Industry Electronic Commerce Association (CIECA) - Assignment Type
CLP	Cause Lookup
CML	Customer Maintenance Level Lookup
CNC	Change Notice Code
COG	Cognizance Symbol
COR	Confirming Party Role
CPS	Court Party Status
CRC	Complaint Request Code
CSD	Customer Service Designator
CSF	Corporate Statement Filing Code
DAC	Document Availability Code
DBS	DUN's Standard Industrial Classification (SIC) 2+2, Dun and Bradstreet
DCC	Cause Code
DGO	Dynamic Generator Set Code
DLO	Dynamic Locomotive Tag Code
DLP	Deferral Lookup
DOF	Direction of Flow
DPC	Delivery Priority Code
DPE	Association of American Railroads Deprescription Exception List
DPL	Association of American Railroads Deprescription Distribution List
DRL	Collision Industry Electronic Commerce Association (CIECA) - Detail Repair Lines Code List
DSR	Data Sets Requested
DSS	Delivery Scheduling Status
EAA	Alabama Campaign Disclosure Report Codes
EAB	Alaska Campaign Disclosure Report Codes
EAC	American Samoa Campaign Disclosure Report Codes
EAD	Arizona Campaign Disclosure Report Codes
EAE	Arkansas Campaign Disclosure Report Codes
EAF	California Campaign Disclosure Report Codes
EAG	Colorado Campaign Disclosure Report Codes
EAH	Connecticut Campaign Disclosure Report Codes
EAI	Delaware Campaign Disclosure Report Codes
EAJ	District of Columbia Campaign Disclosure Report Codes
EAK	Florida Campaign Disclosure Report Codes
EAL	Georgia Campaign Disclosure Report Codes
EAM	Guam Campaign Disclosure Report Codes
EAN	Hawaii Campaign Disclosure Report Codes
EAO	Idaho Campaign Disclosure Report Codes
EAP	Illinois Campaign Disclosure Report Codes
EAQ	Indiana Campaign Disclosure Report Codes
EAR	Iowa Campaign Disclosure Report Codes
EAS	Kansas Campaign Disclosure Report Codes
EAT	Kentucky Campaign Disclosure Report Codes
EAU	Louisiana Campaign Disclosure Report Codes
EAV	Maine Campaign Disclosure Report Codes
EAW	Maryland Campaign Disclosure Report Codes
EAX	Massachusetts Campaign Disclosure Report Codes
EAY	Michigan Campaign Disclosure Report Codes
EAZ	Minnesota Campaign Disclosure Report Codes
EBA	Mississippi Campaign Disclosure Report Codes
EBB	Missouri Campaign Disclosure Report Codes
EBC	Montana Campaign Disclosure Report Codes
EBD	Nebraska Campaign Disclosure Report Codes
EBE	Nevada Campaign Disclosure Report Codes
EBF	New Hampshire Campaign Disclosure Report Codes
EBG	New Jersey Campaign Disclosure Report Codes
EBH	New Mexico Campaign Disclosure Report Codes
EBI	New York Campaign Disclosure Report Codes
EBJ	North Carolina Campaign Disclosure Report Codes
EBK	North Dakota Campaign Disclosure Report Codes
EBL	Ohio Campaign Disclosure Report Codes
EBM	Oklahoma Campaign Disclosure Report Codes
EBN	Oregon Campaign Disclosure Report Codes
EBO	Pennsylvania Campaign Disclosure Report Codes
EBP	Puerto Rico Campaign Disclosure Report Codes
EBQ	Rhode Island Campaign Disclosure Report Codes
EBR	South Carolina Campaign Disclosure Report Codes
EBS	South Dakota Campaign Disclosure Report Codes
EBT	Tennessee Campaign Disclosure Report Codes
EBU	Texas Campaign Disclosure Report Codes
EBV	Utah Campaign Disclosure Report Codes
EBW	Vermont Campaign Disclosure Report Codes
EBX	Virginia Campaign Disclosure Report Codes
EBY	Virgin Islands Campaign Disclosure Report Codes
EBZ	Washington Campaign Disclosure Report Codes
ECA	West Virginia Campaign Disclosure Report Codes
ECB	Wisconsin Campaign Disclosure Report Codes
ECC	Wyoming Campaign Disclosure Report Codes
ECD	Alberta Campaign Disclosure Report Codes
ECE	British Columbia Campaign Disclosure Report Codes
ECF	Manitoba Campaign Disclosure Report Codes
ECG	New Brunswick Campaign Disclosure Report Codes
ECH	Newfoundland Campaign Disclosure Report Codes
ECI	Northwest Territories Campaign Disclosure Report Codes
ECJ	Nova Scotia Campaign Disclosure Report Codes
ECK	Ontario Campaign Disclosure Report Codes
ECL	Prince Edward Island Campaign Disclosure Report Codes
ECM	Quebec Campaign Disclosure Report Codes
ECN	Saskatchewan Campaign Disclosure Report Codes
ECO	Yukon Territory Campaign Disclosure Report Codes
ECP	Federal Campaign Disclosure Report Codes
ECQ	Alabama Lobbyist Report Codes
ECR	Alaska Lobbyist Report Codes
ECS	Arizona Lobbyist Report Codes
ECT	Arkansas Lobbyist Report Codes
ECU	California Lobbyist Report Codes
ECV	Colorado Lobbyist Report Codes
ECW	Connecticut Lobbyist Report Codes
ECX	Delaware Lobbyist Report Codes
ECY	District of Columbia Lobbyist Report Codes
ECZ	Florida Lobbyist Report Codes
EDA	Georgia Lobbyist Report Codes
EDB	Hawaii Lobbyist Report Codes
EDC	Idaho Lobbyist Report Codes
EDD	Illinois Lobbyist Report Codes
EDE	Indiana Lobbyist Report Codes
EDF	Iowa Lobbyist Report Codes
EDG	Kansas Lobbyist Report Codes
EDH	Kentucky Lobbyist Report Codes
EDI	Louisiana Lobbyist Report Codes
EDJ	Maine Lobbyist Report Codes
EDK	Maryland Lobbyist Report Codes
EDL	Massachusetts Lobbyist Report Codes
EDM	Michigan Lobbyist Report Codes
EDN	Minnesota Lobbyist Report Codes
EDO	Mississippi Lobbyist Report Codes
EDP	Missouri Lobbyist Report Codes
EDQ	Montana Lobbyist Report Codes
EDR	Nebraska Lobbyist Report Codes
EDS	Nevada Lobbyist Report Codes
EDT	New Hampshire Lobbyist Report Codes
EDU	New Jersey Lobbyist Report Codes
EDV	New Mexico Lobbyist Report Codes
EDW	New York Lobbyist Report Codes
EDX	North Carolina Lobbyist Report Codes
EDY	North Dakota Lobbyist Report Codes
EDZ	Ohio Lobbyist Report Codes
EEA	Oklahoma Lobbyist Report Codes
EEB	Oregon Lobbyist Report Codes
EEC	Pennsylvania Lobbyist Report Codes
EED	Puerto Rico Lobbyist Report Codes
EEE	Rhode Island Lobbyist Report Codes
EEF	South Carolina Lobbyist Report Codes
EEG	South Dakota Lobbyist Report Codes
EEH	Tennessee Lobbyist Report Codes
EEI	Texas Lobbyist Report Codes
EEJ	Utah Lobbyist Report Codes
EEK	Vermont Lobbyist Report Codes
EEL	Virginia Lobbyist Report Codes
EEM	Washington Lobbyist Report Codes
EEN	West Virginia Lobbyist Report Codes
EEO	Wisconsin Lobbyist Report Codes
EEP	Wyoming Lobbyist Report Codes
EEQ	New York City Campaign Disclosure Report Codes
EER	Seattle Campaign Disclosure Report Codes
EES	New York City Lobbyist Report Codes
EMC	Automotive Aftermarket Industry Association (AAIA) Emission Code
EQR	Equipment Request Codes
ESC	Electrostatic Discharge Code
ESL	Equipment Status Lookup
ETL	Estimate Type Lookup
EWC	Evaluate Work Candidate Lookup
EWR	Evaluate Work Candidate Reason Lookup
EXD	Export Declaration
FAP	Fannie Mae Refinance Plan Code
FC1	Federal Communication, Control and Security Code List 1
FF1	Federal Finance Code List 1
FH1	Federal Health Care Code List 1
FIR	Financial Inventory Report Code
FL1	Federal Logistics Code List 1
FMO	Former Major Organizational Entity Rule Number
FMS	Foreign Military Sales and Military Assistance Program Grant Aid Type of Assistance/Financing Code
FP1	Federal Procurement Code List 1
FRP	Freddie Mac Refinance Plan Code
FT1	Federal Transportation Code List 1
HMC	Hazardous Material Content Code
HRC	Hazardous Response Codes
HZR	Association of American Railroads Standard Transportation Commodity Code Description Qualifier
IBP	Insurance Business Process Application Error Code
IMC	Item Management Code
IMP	Impact Recorder Code
IND	Intra-Navy Disposal Release Order Reject Advice Code
IPA	Impact Axis or Analog Port Code
IPG	Issue Priority Group
IRR	Issue, Repair and Requisition Code
IRT	Imbalance Reporting Type
JCL	Job Characteristics Lookup
JOL	Job Originator Lookup
KYL	Key Event Lookup
LCF	Location Capacity Flow Indicator
LIN	Line of Authority
LOC	Location Indicator
LOI	Logical Observation Identifier Names and Codes (LOINC) Codes
LSC	Legal Structure Code
MAC	Material Management Aggregation Code
MCC	Material Control Code
MCD	Generator Set Mounting Code
MEC	Method of Completion Code
MFD	Manager Forced Directed Action
MOC	Mechanization of Contract Administration Services (MOCAS) System Error Code
MOE	Major Organizational Entity Rule Number
MRC	Reference Partial Descriptive Method Reason Code
MRI	Maximum Rate Indicator
NAC	Nomenclature Activity Classification Economy (NACE) Code
NAF	Norme Activite Francaise (NAF) Code
NAN	Non-Approved Item Name
NAS	Nature of Suit
NCD	Invoice Notes Code
NDC	National Drug Code (NDC)
NIR	Non-Induction Reason Code
NPC	Automotive Aftermarket Industry Association (AAIA) National Popularity Code
NUB	National Uniform Billing Committee (NUBC) Revenue Codes
PCL	Planning Code Lookup
PCR	Pseudo Closure Reason Code
PDA	Pre-determined Allocation (PDA) Transaction Type Code
PGS	Petroleum United States Geological Survey (USGS) Formation Code
PHC	Phrase Code
PIT	Petroleum Bill Type
PLC	Petroleum Land Category
PLS	Petroleum Lease Status
POB	Part of Body and Nature of Injury
PPD	Petroleum Product Disposition
PPP	Petroleum Product Point-of-Sale
PPS	Petroleum Product Selling Arrangement
PPV	Petroleum Product Value Adjustment
PQA	Petroleum Quantity Allocations Code
PRA	Petroleum Royalty Adjustment
PRC	Petroleum Royalty Calculation Method
PRI	Processing Rights Indicator
PRR	Petroleum Regulatory Report
PRT	Petroleum Royalty Transaction
PWA	Petroleum Well Action
PWI	Petroleum Well Information
PWR	Petroleum Well Shut-In Reason
PWS	Petroleum Well Classification Status
PWT	Petroleum Well Test Information
QDR	Product Quality Deficiency Report Summary Code
RAS	Receipt Acceptance Site Code
RCA	Registered Contractor Activity Code
REC	Race or Ethnicity Collection Code
RED	Reduction Reason Code
REN	Association of American Railroads Rate EDI Network Error Code
RET	Classification of Race or Ethnicity
RFC	Reference Number Format Code
RFM	Reason for Movement Code
RJC	Reference Number Justification Code
RNC	Reference Number Category Code
RPQ	Replenishment Demand Information
RQI	Retail Demand Information
RRC	Reason for Reversal Code
RSS	Receipt Scheduling Status
RTC	Registration Type Code
RUM	Refrigeration Unit Operating Mode Code
RVC	Reference Number Variation Code
SAT	Stock Action/Technical Information Code
SBA	Statistic Bundes Amt (SBA) Code
SCI	Subsequent Cycle Indicator
SEC	Stock Exchange Code
SET	Settlement Type
SHL	Safety Hazard Lookup
SHM	Accident Resulting Change Code
SHN	Active Mitigation Consideration Code
SHO	Activity Methods Code
SHP	Analytical Method Code
SHQ	Atmospheric Stability Class Code
SHR	Basis of Estimate Code
SHS	Certification Code
SHT	Contributing Factor Code
SHU	Control Device Type Code
SHV	Design/Standard Code
SHW	Device Classification Code
SHX	Discharge Indicator Code
SHY	Discharge Quantity Range Code
SHZ	Non-Reportable Discharge Indicator Code
SIA	Emergency Response Regulation/Statute Code
SIB	Emission Factor Type Code
SIC	Emission Release Point Type Code
SID	Emission Source Type Code
SIE	Emission Type Code
SIF	Emission Unit Type Code
SIG	Endpoint Code
SIH	Environment Code
SII	Environmental Program Type Code
SIJ	Environmental Receptor Code
SIK	Facility Category Code
SIL	Facility Status Code
SIM	Factor Calculation Method Code
SIN	Frequency of Analysis Code
SIO	Generator Status Code
SIP	Geometric Type Code
SIQ	Hazardous Waste Form Code
SIR	Horizontal Datum Code
SIS	Information System Code
SIT	Initiating Event Code
SIU	Inventory Quantity Range Code
SIV	Latitude/Longitude Source Code
SIW	Latitude/Longitude Verification Code
SIX	Location Description Code
SIY	Major Hazard Code
SIZ	Manufacturing Code
SJA	Material Classification Code
SJB	Material Code
SJC	Maximum Achievable Control Technology Code
SJD	Method of Collection Code
SJE	Mitigation System Code
SJF	Model Used Code
SJG	Monitoring/Detection System Code
SJH	Monitoring Location Code
SJI	Non-Generating Waste Code
SJJ	Off-Site Availability Code
SJK	Off-Site Impact Code
SJL	On-Site Impact Code
SJM	On-Site Process System Type Code
SJN	Origin Code
SJO	Parameter Code
SJP	Passive Mitigation Consideration Code
SJQ	Permit Compliance Status Code
SJR	Physical State Code
SJS	Point of Measurement Code
SJT	Preservative Code
SJU	Process Code
SJV	Process Control Code
SJW	Process Hazard Analysis Update Resulting Change Code
SJX	Process Hazards Analysis Technique Code
SJY	Public Receptor Code
SJZ	Range of Concentration Code
SKA	Recovery Method Code
SKB	Recycling Method Code
SKC	Release Event Code
SKD	Release Source Code
SKE	Reliability Indicator Code
SKF	Rule Effectiveness Method Code
SKG	Sample Type Code
SKH	Scenario Code
SKI	Site Location Code
SKJ	Source Category Code
SKK	Source of Waste Generation Code
SKL	Source Reduction Activity Code
SKM	System Type Code
SKN	Time Period Code
SKO	Topography Code
SKP	Transfer Quantity Range Code
SKQ	Type of Competency Testing Code
SKR	Type of Training Code
SKS	Type of Waste Management Code
SKT	Use Code
SKU	Waste Emanation Code
SKV	Waste Management Status Code
SKW	Waste Stream Code
SKX	Waste Treatment Method Code
SKY	Wind Direction Code
SKZ	Unit of Measure Code
SLA	Shelf-Life Action Code
SLS	Scheduling Status
SMB	Statement Basis
SMC	Special Material Content Code
SMD	Sample Device
SMI	Special Material Identification Code
SMT	Sample Type
SPE	Special Dating
SRL	Special Requirement Lookup
SRR	Supplemental Reduction Reason
SRT	Storage Report Type
SSC	Supply Status Code
STC	Association of American Railroads Standard Transportation Commodity Code Master Description Information
STF	Forward and Store Application Error Edit Codes
SUI	Solicited/Unsolicited Indicator
SVC	Service Code
SWR	Association of American Railroads Switch Release Codes
T00	Commercial Vehicle Operations Safety Code
T01	Data Categories
T02	Event Codes
T03	Operation Type
T04	Accident Parameters
T05	Inspection Parameters
T06	Driver Parameters
T07	View Parameters
T08	Vehicle Parameters
T09	Fleet Parameters
T10	Query Options
T11	Jurisdiction Type
T12	Single State Registration System and Operating Authority Credential
T13	Commercial Vehicle Operations Insurance
T14	Commercial Vehicle Registration
T15	Hazardous Materials Credential
T16	Oversize/Overweight Credential
T17	Commercial Vehicle Tax
T18	Commercial Vehicle Title
T19	Commercial Driver's License
T20	Commercial Vehicle Type
T21	Commercial Vehicle Operations Status Code
T22	Safety and Fitness Electronic Record Systems Subscription Option
T23	Commercial Vehicle Operations Commodity Code
T24	Commercial Vehicle Operations Hazardous Material Code
T25	Safety and Fitness Electronic Record Systems Error Code
T26	Commercial Vehicle Operations Jurisdiction Identifier Code
T27	Compliance Review Code
T28	Incident Condition Code
T29	Incident Related Action Code
T30	Incident Location Code
T31	Incident Consequence Code
T32	Road Characteristic Code
T33	Vehicle Occupant Code
T34	Package Failure Code
T35	Pedestrian Code
TC1	Type of Change Code
TCD	Collision Industry Electronic Commerce Association (CIECA) - Totals Code List
TCL	Template Characteristic Lookup
TDC	Discrepancy Report Type Code
TDJ	Technical Data Justification Code
TFR	Tax or Fee Exemption Reason Code
TOC	Weapon System Transaction Origination Code
TOL	Template Owner Lookup
TTL	Template Type Lookup
UDC	Unique Item Tracking Designator Code
UER	Unique Item Tracking Error Reject Code
UJC	Urgency Justification Code
UNP	(UN/SPSC) United Nations Products and Services Classification Code
UPC	Unclaimed Property Additions, Deletions, and Deductions Codes
UPT	Unclaimed Property Type Code
UTC	Unique Item Tracking Transaction Code
VAL	Validation Code
WAC	Weapon System Advice Code
WDL	When Discovered Lookup
WEC	Weapon System Essentiality Code
WRC	Automotive Aftermarket Industry Association (AAIA) Warranty Code
WSC	Weapon System Status Code
WSD	Weapon System Designator Code
WSM	Weapon System Maintenance Code

MEA12 - Industry Code

TYPE=AN MIN=1 MAX=30

Code indicating a code from a specific industry code list

rev 11/6/2024